help getting front shocks off
#1
help getting front shocks off
hey guys
i have a 99 coupe and im trying to install coilovers but i dont have a 32 mm socket (to remove the hub)
i couldnt get my ratchet to take off the shock from the fork and i cant remove the fork because of crap in the way
im looking for an easier bolt to remove because after you remove the bolt from the control arm and fork its a B1TCH to get back in line so now im wondering if anyone knows an easier way to get the fork off
also does anyone know if the 14mm bolt that locks the shock to the fork usually siezes? i dont know for sure if the last mech put on anti sieze on that bolt last time
i have a 99 coupe and im trying to install coilovers but i dont have a 32 mm socket (to remove the hub)
i couldnt get my ratchet to take off the shock from the fork and i cant remove the fork because of crap in the way
im looking for an easier bolt to remove because after you remove the bolt from the control arm and fork its a B1TCH to get back in line so now im wondering if anyone knows an easier way to get the fork off
also does anyone know if the 14mm bolt that locks the shock to the fork usually siezes? i dont know for sure if the last mech put on anti sieze on that bolt last time
#3
Are u talking about the 2 bolts on the fork the 17 connecting to the lxa and 14holding the shock? If so I couldn't get to the14 mm bolt I was worried if I used an extension and a breaker bar I'd bend the extension (happened another time) I looked up on a diy and that what the guy did (remove the hub)
if anything can I do the front shocks myself (diy said I'd need a friend to push the drive axle up)
if anything can I do the front shocks myself (diy said I'd need a friend to push the drive axle up)
#4
Dont remove the hub. thats just way too much work. get a longer socket or a small extension. If you have quality tools [not jobmate] it will not bend. instead of putting a lot of weight on the end of the ratchet try flexing bit by bit so it would crack. also could spray some pb blaster to make it easier to crack.
where abouts are you located? i could swing by and help you out if you want.
where abouts are you located? i could swing by and help you out if you want.
#5
thx for the help guys it seems it was just my stupidity that got in the way lol the car wasnt jacked up enough and my breaker bar didnt have enough room to spin ahah oh well when i first gave up it was like 2 am now in the day my minds a bit sharper lol got em both off in like 2 hours (honda pros dont laugh its my first time :P)
Thread
Thread Starter
Forum
Replies
Last Post
civic_integra
Interior - Audio - Security
11
01-Aug-2005 12:53 PM
coreyhayman
Honda Civic Performance - JDM Discussion
10
09-Nov-2004 02:20 PM
imported_Samiam
Honda Civic Performance - JDM Discussion
20
29-Oct-2004 12:19 PM
90EFHB
Honda Civic Performance - JDM Discussion
3
31-Aug-2002 07:57 PM