Shifter making a weird sound
11-Sep-2003, 11:45 PM
#1
Registered User
Thread Starter
Join Date: Apr 2003
Location: Brampton
Posts: 3,129
Shifter making a weird sound
If I am in neutral, and I want to shift to 5th or reverse, I get a strange clicking sound. I got no idea what it is. When I am in 4th and gearing to 5th, it is fine but just when I am in neutral and move it to the right it makes a strange sound. anyone know wtf is up with that? Any help appreciated, thanks!
12-Sep-2003, 10:42 PM
#4
Registered User
Join Date: May 2003
Location: RichmondHill, Toronto
Posts: 764
If its tinny clicking noises, its normal. Just your hydro transmission pump.
But if its when you shift to reverse from neutural, and there is a nasty CRAAAAACH noise, its your clutch and reverse engaging like crap. The solution is to shift to 2nd and then reverse, and it engages smoothly.
But if its when you shift to reverse from neutural, and there is a nasty CRAAAAACH noise, its your clutch and reverse engaging like crap. The solution is to shift to 2nd and then reverse, and it engages smoothly.
15-Sep-2003, 12:28 AM
#7
!!!!AWAITING CONFIRMATION!!!!!!
Join Date: Jun 2002
Location: not at the pump...
Posts: 933
it is prolly the bushings on the shifter itself..
even try lifing the shifter up to see if the plastic ring has failed..
pickup one of those E/S bushing kits for your shifter, and maybe some shifter bushings (inside the shifter itself) and you should be ok.
even try lifing the shifter up to see if the plastic ring has failed..
pickup one of those E/S bushing kits for your shifter, and maybe some shifter bushings (inside the shifter itself) and you should be ok.
15-Sep-2003, 01:24 AM
#9
!!!!AWAITING CONFIRMATION!!!!!!
Join Date: Jun 2002
Location: not at the pump...
Posts: 933
I know, but it could be ... HA sport, just released the hydro conversion kit, but I doubted, its the bushings
or if it is a B series swap the linkages/stabilizer bar were crap made and are rubbing on eachother.
or if it is a B series swap the linkages/stabilizer bar were crap made and are rubbing on eachother.
15-Sep-2003, 01:09 PM
#10
Senior Member
Join Date: May 2003
Location: Ontario
Posts: 18,367
I have a B&M short shifter and when I push the shifter to the right and go reverse (before shift into reverse) there is a little vibration, not really clicking. Or it could have been.
It is the bottom of your short shifter touching the exhause pipe. I believe.
It is the bottom of your short shifter touching the exhause pipe. I believe.
17-Sep-2003, 11:04 PM
#11
Registered User
Thread Starter
Join Date: Apr 2003
Location: Brampton
Posts: 3,129
It's an OEM shifter, no shortshifter or anything.
How much should I expect to pay for new stab. bushings? New to this ****.
And also, should I just pick up a new shifter while i'm at it, I was going to pick up an SS sometime soon anyways.
Thanks
How much should I expect to pay for new stab. bushings? New to this ****.
And also, should I just pick up a new shifter while i'm at it, I was going to pick up an SS sometime soon anyways.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
imported_SpinZSi
Honda Civic Performance - JDM Discussion
5
20-Jun-2007 09:13 AM
moto_spritz
Honda Civic Performance - JDM Discussion
9
01-Apr-2007 01:16 PM
Sassafrass
Honda Civic Performance - JDM Discussion
8
28-Jul-2002 12:58 AM
