jdmchek

whats a good turbo for my low compression b16a2
i had a turbonetics t3/t4 n it was kinda laggy n took 2 long 2 spool .
what can i used thats better then that with more *****???

D.T.P

You want a turbo with less lag and bigger *****? Well the bigger turbo the more lag you get. So go with smaller turbo than t3t4 and it will have less lag. To get more power of it go with higher psi for turbo but you will have to do internals.

zeeman

iTrader: (1)

use the available compressor maps for a specific turbo you're interested in to help you choose which turbo will be the most efficient for your setup.

Reading compressor maps is kinda confusing though, so you've got a lot of reading to do.

weir

http://www.turbobygarrett.com/turbob...R_705330_2.htm

i'd suggest a larger gt28 from reading your post.

stealth512

That's probably a good call. I was going to say it would help if we knew which t3/t4 you had (trim, a/r)...but the answer above probably covers that.

megomaniac

how about a gt30r with a .63ar turbine housing to slighty speed spool but still mad power potential. or just brake boost it.

zeeman

iTrader: (1)

a GT30R or GT35R .63 a/r will work pretty good on a b16 (from past experiences).

I'm using a GT3255E on mine and its great.

Carbon

Gt3076r. Great Range with a minimal amount of lag. Although try to get a .48 housing to help with spool times.

iamcanadian_31

anyone help clarify this gt30 gt 35 gt3076 crap?..... what do the numbers directly represent?

iamcanadian_31

and the t3/t4 stuff?? thanks guys

gagnier

If you want any reading material to help understand compressor maps and such you could check out the following link or do a search for Maximum Boost by Corky Bell in PDF , it should be somewhere on rapidshare;

Amazon.com: Maximum Boost: Designing, Testing, and Installing Turbocharger Systems (Engineering and Performance) (9780837601601): Corky Bell: Books