jamie1985

Ok everyone so my master cylinder was leaking and my slave cylinder had a torn boot. I replaced both pieces, purged the system and adjusted the nut for proper pedal movement and it's running perfectly now! Thank-you everyone for your help!

civicEJ1

iTrader: (2)

nice

jamie1985

Thanks civicEJ1

crac1225

ei guys i need help regarding clutch on a honda crx 1990. when i press the clutch and change gears it goes in smooth but when the car is running already and i press the gas i feel the engine revs up but doesn't go fast as the engine revs up. i dont know if the clutch is worn out already or some ppl told me to check the clutch fluid cylinder if empty. is there a clutch cylinder on a 90 crx? sorry guys don't know much bout cars but trying to do some. i have asked canadian tire on charges for clutch change its a reap off too $89/hr charge. any other places you recommend for cheaper price? thanks

rascles

if you have a brake fluid res. and another one also its for the clutch. make sure that has clean fluid, do a tranny fluid change if you want then get a new clutch

redwards

you should have a cable trans, not a hydro, unless the car isnt stock. if the car is stock it sounds like your clutch is slipping and you should be looking at getting it replaced. unless i misunderstood what you were saying.

papoose03

yes that is your slave cylinder...most or all hondas use DOT4 brake fluid in thier car.. try topping up the fluid on that cylinder and pump the clutch a couple of times and then go out for a spin and try it out..to mee it sounds like your slave cylinder fluid is low so just top it up

crac1225

the is only one reservoir in it, only the break fluid i i think and the clutch cable. i have also asked some pipol and said that maybe the "angle arm" that pushes the clutch which doesn't go back the way it should be when pressing the clutch that is why it slips when revs up. if weather is also very cold it is more worse than the normal situation that is happening.
thanks for inputs guys. anymore inputs would be gladly appreciated.

bseries_el

yes...

RedLine Tuner

so as jamie said before i to also have that noise. wen the car is idling and its in neutral i hear this wierd noise but as soon as i press on the clutch it goes away. wat could it b?

FPMotorsports

From what Im getting jamie 1985 your clutch is gone.
I have a exedy OEM clutch and L.S.D clutch for D series let me know
Both are brand new.

jamie1985

The noise when the car is running that goes away when you press the clutch is the throw out bearing....no big deal, just annoying. lol

chris_v2

Actually, it could also be the input shaft bearing. You won't know until you tear it apart really..

Or you could use a stethoscope to help hear where it's coming from.

Clean95d16

agreed: just the throw out bearing, not a huge deal just keep that clutch in if u wanna look pretty :P.. cuz theres alot of people that cringe at the sound of that rattle. lol