oil change noob questions
#1
oil change noob questions
Hey guys, I have a couple of questions.
How tight do you torque the drain bolt?
Should the drain bolt ever be changed? I heard the washer must be changed with every oil change, is this true?
Thanks
How tight do you torque the drain bolt?
Should the drain bolt ever be changed? I heard the washer must be changed with every oil change, is this true?
Thanks
#2
if its not leaking, dont replace it.
Usually i visually inspect the washer, if it looks fine, re-use it.
It's 18 ft lbs I believe. But usually snug is good enough. I just snug it with my fingers then give it about 1/8th of a turn so its tight, but not over tight.
I've seen people strip the threads from over-tightening the pan is aluminum!
Usually i visually inspect the washer, if it looks fine, re-use it.
It's 18 ft lbs I believe. But usually snug is good enough. I just snug it with my fingers then give it about 1/8th of a turn so its tight, but not over tight.
I've seen people strip the threads from over-tightening the pan is aluminum!
#4
iv stripped the bolt. sucks the big one.. had to put an over sized bolt with a new washer .. still leaks but very little.
#5
Thread
Thread Starter
Forum
Replies
Last Post
arc_55
Honda Civic (+ other) Parts/Accessories for Sale or Trade
0
25-Sep-2010 12:10 AM
ELGUY
Honda Civic Performance - JDM Discussion
14
29-Sep-2006 03:46 PM
imported_BlitzSix
Honda Civic Performance - JDM Discussion
22
14-Aug-2006 06:11 AM
imported_premium plus
CFz Discussion
19
16-Sep-2004 11:38 AM