LilVito

Can someone tell me how to reset the ecu?

I know you have to pull the HAZARD fuse ? Can someone tell me where this fuse is located ?

I have an 89 DX and I just put in the SI motor.

HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!

LilVito

CAN SUM1 PLEASE REPLY

I know sum1 knows where the dam fuse is.

dingus8

to reset the ecu pull the negative battery cable and let it sit for awhile...then start...without applying throttle for 5 minutes then drive....what ecu did you use with the conversion..? the si ecu I hope

LilVito

i had to do the wiring for the Si Computer so the answer is yes I am using the Si Computer.

LilVito

Oh I Forgot.

The reason I need to reset the computer is because it keeps flashing code 10 (Intake Air Temperature Sensor) I replaced the sensor and now it needs to be reset.

If the reset doesn't work I'll be back.

LilVito

Well it didn't work the computer is still flashing 10.

Yes I replaced the intake air temperature sensor with a new one and the problem still comes up.

I'm ready to call it quits soon if this doesn't work.

The car does crank however but it doesn't idle at all I have to keep my foot on the gas in order to keep it running.

Any suggestions pleasse help.

bbarbulo

iTrader: (2)

check continuity in wiring, and double and triple check the ECU pinout!!

LilVito

you mean the pinout just for the IAT right

imported_gatherer

to reset the ECU pull the battery cables and wait 20 minutes... then replace of course you loose all your radio settings but for me it works...

LilVito

Tried the pulling of the terminals and the code 10 doesn't go away.

I'm gonna check the sensors again and the wiring.

LilVito

WOOOOOOHOOOOOOOOO !!!!!!!!!!!!!!!!!!!!!!!!!

I GOT IT

I had to sensors in the wrong spot which is why it kept giving me the code 10 problem.

ROOKIE MISTAKE but now I Know.

Thanx for the help boys and girls.