Alarm Sytem Help
#1
Alarm Sytem Help
so as most of you know i won that viper alarm in the last giveaway. anyways im trying to save myself around 300 bucks by installing it myself but i'm totally lost. im aces when it comes to anything mechanical with a car besides electronic aspects unless its as simple as a subwoofer or something. so im looking for some help on what harness to splice into, what wires do what in the harness, and pretty much how to wire this bad boy up. (please keep stupid comments to yourself, this thread is strictly for help)..
anyways ill make a list of each harness for the alarm and where they need to go. maybe someone can give me some help.
main harness (12 pin connector)
1 (-) 200ma AUX/trunk output
2 (+)12v DC constant output i know this goes to the battery
3 (+)Siren Output
4 Parking light isolation wire-pin 87a of onboard relay
5 (-)chassis ground obviously a ground wire
6 (+)door trigger input
7 (-)trunk pin/ instant trigger input (N/C or N/O)
8 (door trigger input (N/C or N/O)
9 (-)200ma done light supervision output
10 (-)remote start/turbo timer activation input
11 parking lights output
12 (-)500ma ground when armed output
door lock, 3 pin connector what do i do since i have manual doors? not use it?
1(-) 500ma unlock output
2not used
3 (-)500ma lock output
harness #2, 18-pin connector
1 (-) 200ma OEM alarm disarm output
2 (-) 200ma aux 4 output
3 (-)200ma OEM alarm arm output
4 (-)200ma aux 2 output
5 (-) 200ma aux 3 output
6 (-) 200ma aux 1 output
7 (-) deisel wait to start input
8 (-) 200ma horn honk output
9 tachometer input
10 (-) 200ma status output
11 (-) 200ma flex relay control output
12 (-) 200ma accessory output
13 (-)200ma starter output
14 (-) 200ma ignition 1 output
15 (-) hood pin input (N/C or N/O)
16 (-) 200ma 2nd status/rear defogger output
17 (+) brake shutdown input
18 (-) neutral safety input
the other ports have spots for the neutral safety switch, control center etc that are all plug in wired.
^^ thats what i need to know for the alarm part, please help with that whatever you can
anyways ill make a list of each harness for the alarm and where they need to go. maybe someone can give me some help.
main harness (12 pin connector)
1 (-) 200ma AUX/trunk output
2 (+)12v DC constant output i know this goes to the battery
3 (+)Siren Output
4 Parking light isolation wire-pin 87a of onboard relay
5 (-)chassis ground obviously a ground wire
6 (+)door trigger input
7 (-)trunk pin/ instant trigger input (N/C or N/O)
8 (door trigger input (N/C or N/O)
9 (-)200ma done light supervision output
10 (-)remote start/turbo timer activation input
11 parking lights output
12 (-)500ma ground when armed output
door lock, 3 pin connector what do i do since i have manual doors? not use it?
1(-) 500ma unlock output
2not used
3 (-)500ma lock output
harness #2, 18-pin connector
1 (-) 200ma OEM alarm disarm output
2 (-) 200ma aux 4 output
3 (-)200ma OEM alarm arm output
4 (-)200ma aux 2 output
5 (-) 200ma aux 3 output
6 (-) 200ma aux 1 output
7 (-) deisel wait to start input
8 (-) 200ma horn honk output
9 tachometer input
10 (-) 200ma status output
11 (-) 200ma flex relay control output
12 (-) 200ma accessory output
13 (-)200ma starter output
14 (-) 200ma ignition 1 output
15 (-) hood pin input (N/C or N/O)
16 (-) 200ma 2nd status/rear defogger output
17 (+) brake shutdown input
18 (-) neutral safety input
the other ports have spots for the neutral safety switch, control center etc that are all plug in wired.
^^ thats what i need to know for the alarm part, please help with that whatever you can
#2
then there is the harness for the remote start, which i also do not know where to wire in
harness #3 10-pin remote start connector
1 (+) ignition 1 input
2 (87) flex relay input (30a fused)
3 (+) accessory output
4 (+) starter output (car side of starter kill)
5 (+) starter input (key side of starter kill)
6 ignition 1 input (30a fused)
7 (30) flex relay output
8 (87a) flex relay input
9 accessory/starter relay input (30a fused)
10 no connection
harness #3 10-pin remote start connector
1 (+) ignition 1 input
2 (87) flex relay input (30a fused)
3 (+) accessory output
4 (+) starter output (car side of starter kill)
5 (+) starter input (key side of starter kill)
6 ignition 1 input (30a fused)
7 (30) flex relay output
8 (87a) flex relay input
9 accessory/starter relay input (30a fused)
10 no connection
#3
main harness (12 pin connector)
1 (-) 200ma AUX/trunk output
2 (+)12v DC constant output white wire, ignition switch harness
3 (+)Siren Output siren positive wire
4 Parking light isolation wire-pin 87a of onboard relay re/black wire, at fusebox or drivers kick panel
5 (-)chassis ground obviously a ground wire
6 (+)door trigger input light green/red wire, in drivers kick pane;
7 (-)trunk pin/ instant trigger input (N/C or N/O)
8 (-) door trigger input (N/C or N/O) not sure, just ground?
9 (-)200ma done light supervision output considering attaching to negative of dome light plug?
10 (-)remote start/turbo timer activation input
11 parking lights output red/black wire, @ fuse box or divers kick panel
12 (-)500ma ground when armed output
door lock, 3 pin connector what do i do since i have manual doors? not use it?
1(-) 500ma unlock output green/red wire, @ 2-pin blue plug behind fusebox
2not used
3 (-)500ma lock output green/white wire, @ 2-pin blue plug behind fusebox
harness #2, 18-pin connector
1 (-) 200ma OEM alarm disarm output not applicable?
2 (-) 200ma aux 4 output not applicable?
3 (-)200ma OEM alarm arm output not applicable?
4 (-)200ma aux 2 output not applicable?
5 (-) 200ma aux 3 output not applicable?
6 (-) 200ma aux 1 output not applicable?
7 (-) deisel wait to start input not applicable?
8 (-) 200ma horn honk output blue/green or blue/red wire, @steering column harness
9 tachometer input blue wire, @ 2-pin plug near dizzy
10 (-) 200ma status output not sure where negative is
11 (-) 200ma flex relay control output
12 (-) 200ma accessory output not sure where negative is
13 (-)200ma starter output not sure where negative is
14 (-) 200ma ignition 1 output not sure where negative is
15 (-) hood pin input (N/C or N/O) wire goes tot he hood pin sensor i got?
16 (-) 200ma 2nd status/rear defogger output
17 (+) brake shutdown input green/white wire, @ switch above brake pedal
18 (-) neutral safety input negative of neutral safety switch?
1 (-) 200ma AUX/trunk output
2 (+)12v DC constant output white wire, ignition switch harness
3 (+)Siren Output siren positive wire
4 Parking light isolation wire-pin 87a of onboard relay re/black wire, at fusebox or drivers kick panel
5 (-)chassis ground obviously a ground wire
6 (+)door trigger input light green/red wire, in drivers kick pane;
7 (-)trunk pin/ instant trigger input (N/C or N/O)
8 (-) door trigger input (N/C or N/O) not sure, just ground?
9 (-)200ma done light supervision output considering attaching to negative of dome light plug?
10 (-)remote start/turbo timer activation input
11 parking lights output red/black wire, @ fuse box or divers kick panel
12 (-)500ma ground when armed output
door lock, 3 pin connector what do i do since i have manual doors? not use it?
1(-) 500ma unlock output green/red wire, @ 2-pin blue plug behind fusebox
2not used
3 (-)500ma lock output green/white wire, @ 2-pin blue plug behind fusebox
harness #2, 18-pin connector
1 (-) 200ma OEM alarm disarm output not applicable?
2 (-) 200ma aux 4 output not applicable?
3 (-)200ma OEM alarm arm output not applicable?
4 (-)200ma aux 2 output not applicable?
5 (-) 200ma aux 3 output not applicable?
6 (-) 200ma aux 1 output not applicable?
7 (-) deisel wait to start input not applicable?
8 (-) 200ma horn honk output blue/green or blue/red wire, @steering column harness
9 tachometer input blue wire, @ 2-pin plug near dizzy
10 (-) 200ma status output not sure where negative is
11 (-) 200ma flex relay control output
12 (-) 200ma accessory output not sure where negative is
13 (-)200ma starter output not sure where negative is
14 (-) 200ma ignition 1 output not sure where negative is
15 (-) hood pin input (N/C or N/O) wire goes tot he hood pin sensor i got?
16 (-) 200ma 2nd status/rear defogger output
17 (+) brake shutdown input green/white wire, @ switch above brake pedal
18 (-) neutral safety input negative of neutral safety switch?
#4
harness #3 10-pin remote start connector
1 (+) ignition 1 input black/yellow wire, ignition switch harness
2 (87) flex relay input (30a fused)
3 (+) accessory output yellow wire, ignition switch harness
4 (+) starter output (car side of starter kill) found a site that says the starter wire is black/white, so that colour on this side of the starter?
5 (+) starter input (key side of starter kill) black/white wire on this side of the starter?
6 ignition 1 input (30a fused) black/yellow wire, ignition switch harness (same as pin 1 on this connector??)
7 (30) flex relay output
8 (87a) flex relay input
9 accessory/starter relay input (30a fused) black/white wire from key side of starter kill?
10 no connection
1 (+) ignition 1 input black/yellow wire, ignition switch harness
2 (87) flex relay input (30a fused)
3 (+) accessory output yellow wire, ignition switch harness
4 (+) starter output (car side of starter kill) found a site that says the starter wire is black/white, so that colour on this side of the starter?
5 (+) starter input (key side of starter kill) black/white wire on this side of the starter?
6 ignition 1 input (30a fused) black/yellow wire, ignition switch harness (same as pin 1 on this connector??)
7 (30) flex relay output
8 (87a) flex relay input
9 accessory/starter relay input (30a fused) black/white wire from key side of starter kill?
10 no connection
#6
Thread
Thread Starter
Forum
Replies
Last Post
imported_Clayton
Honda Civic (+ other) Parts/Accessories for Sale or Trade
6
28-May-2006 01:24 AM
civic_integra
Honda Civic (+ other) Parts/Accessories for Sale or Trade
6
14-May-2006 04:37 PM
imported_angryasian
Honda Civic (+ other) Parts/Accessories for Sale or Trade
7
13-Feb-2006 08:53 AM
civic_integra
Interior - Audio - Security
11
01-Aug-2005 12:53 PM
johnny23toronto
Interior - Audio - Security
0
29-Jan-2003 09:31 PM