imported_zhu

I'm trying to install this alarm that I just bought.. but I'm having a LOT of trouble finding some of these wires..
don't know where to look

I'm looking at the alarm wiring diagram and it needs the following:

ACC - no clue what this is
IG1 - ignition 1?
IG2 - ignition 2?
STR - starter?
Turn signals
Door pin switch + and -.. think dome light will work for this too
ACC /ON - no clue waht this is
12v brake wire


if anybody knows where I can find these wires I'd greatly appreciate it or if you know a site that show these wires.

By the way, its for a 95 civic dx coupe


Thanks!

imported_kIeRaN

Door pin switch + and -.. think dome light will work for this too
dome lite will work, ull find it going up your A pillar

12v brake wire
its under your dash, u have to find it by finding which wire has power when u press the brake down.

YUM

the rest of the wires you will find in the steering coloumn

sohcnotec

You can try this site. It may (or may not) help you.
A 95 Civic isn't listed, but it's probably pretty close to the Integra on the list near the bottom of the page. Double check w/ test light though.
Lots of good info on alarms/remote start/car audio there too.

http://www.the12volt.com/info/diagrams.asp#req

imported_andyhoiho

that's a great infor.......it's useful for me...
thanks

imported_zhu

How does a test light work? o.O I think I have one of those.
Its like a pen with a light inside with a pointy end, and an aligator clip off a wire on the other end.

Is it possible to test for power in a wire without actually cutting the wire using this test light?


Thanks


my test like looks identicle to this actually:

imported_kIeRaN

YES ANDREW U CAN DO IT BY POKING the point into the wire!!!!! Why dont u just listem to me!!!!

imported_higguns

also diagrams can be found here
http://www.bulldogsecurity.com/wireing%20diagrams2.htm
just cuz i couldnt find all vechiles on that list

imported_zhu

I'm looking at the wiring diagram for my alarm right now...
theres a wire labeled "ACC" (its blue).. have no idea what this is .. anybody know?

And also, there is no tach wire for some reason.. there should be one right?

YUM

that's your accessory (ACC) wire, it's in the ignition harness, white/black.

your alarm does not need a tach, unless you have a alarm/remote starter combo.

imported_zhu

the thing is... it is an alarm/starter combo ><

YUM

then you should have a tach wire from the alarm/starter, the tach is under the hood... can't remember exactly where it is.. should be by the driver side strut mount.... correct me if i'm wrong

imported_kIeRaN

, yes it is a bit closer to the firewall tho, im p[retty sure its a green wire with one connector that is connected to nothing

YUM

^^ Thanks Kieran