need help finding a good header for a 97 integra
21-Oct-2008, 11:57 AM
#1
Member
Thread Starter
Join Date: Nov 2007
Location: thunder bay
Posts: 49
need help finding a good header for a 97 integra
looking for a polish coated and 4-1 header for a integra 1.8L not sure what good brands there are if any one has any suggestion let me know thank you
21-Oct-2008, 12:24 PM
#2
vibrant j-spec is nice, good ground clearance, good performance and affordable.
hytech replica is nice, not so good ground clearance, good performance and reasonably priced.
Rage is nice, another hytech replica but still pretty expensive.
DC jdm header with 2.5" collector performs well, is affordable, but to me DC headers don't have the quality (I had one and it rusted out pretty quick).
The edelbrock is good, especially with the 2.5" collector mod, has good ground clearance and is decently priced.
And of course SMSP, hytech, DTR, RMF and burns are all very nice, but quite expensive and not always power steering or a/c compatible....more of a full-race type header.
hytech replica is nice, not so good ground clearance, good performance and reasonably priced.
Rage is nice, another hytech replica but still pretty expensive.
DC jdm header with 2.5" collector performs well, is affordable, but to me DC headers don't have the quality (I had one and it rusted out pretty quick).
The edelbrock is good, especially with the 2.5" collector mod, has good ground clearance and is decently priced.
And of course SMSP, hytech, DTR, RMF and burns are all very nice, but quite expensive and not always power steering or a/c compatible....more of a full-race type header.
21-Oct-2008, 07:38 PM
#4
Member
Thread Starter
Join Date: Nov 2007
Location: thunder bay
Posts: 49
around 600 US around there i was looking at
94-99 Acura Integra GSR
Edelbrock Exhaust - Pro Flo 2-Piece Headers (Polished)
http://www.andysautosport.com/acura/...l00125525.html
dosent specify if its a 4-2-1 or 4-1 i was wonder what you guys thought of it.
thank you
94-99 Acura Integra GSR
Edelbrock Exhaust - Pro Flo 2-Piece Headers (Polished)
http://www.andysautosport.com/acura/...l00125525.html
dosent specify if its a 4-2-1 or 4-1 i was wonder what you guys thought of it.
thank you
06-Nov-2008, 12:13 PM
#10
which version?
Those "tri-Y" copies are actually VERY VERY VERY poor quality. I've seen one in peices (literally) and let me tell you, the 8 year old boys who make these in tiawan don't do a very good job. They also have crap ground clearance, but are cheap and make decent power.
I've made over 200whp with the vibrant j-spec 4-2-1 on a 1.8L with a cat, resonator and muffler.
A good tri-y (hytech, SMSP, DTR, RMF, etc etc) is worth every penny but most people can't justify the cost.
Those "tri-Y" copies are actually VERY VERY VERY poor quality. I've seen one in peices (literally) and let me tell you, the 8 year old boys who make these in tiawan don't do a very good job. They also have crap ground clearance, but are cheap and make decent power.
I've made over 200whp with the vibrant j-spec 4-2-1 on a 1.8L with a cat, resonator and muffler.
A good tri-y (hytech, SMSP, DTR, RMF, etc etc) is worth every penny but most people can't justify the cost.
Thread
Thread Starter
Forum
Replies
Last Post
civic_integra
Interior - Audio - Security
11
01-Aug-2005 12:53 PM
imported_gohondago
CFz Discussion
0
05-Nov-2002 04:11 PM
