imported_JookSingKid

Does anyone know if there is a difference between fuel filters for Civics and Integras... B and D series engines or are they all the same?

Astroboy

Part numbers look to be all the same

http://www.honda-auto-parts-wholesale.com

imported_JookSingKid

Thanks for the link, from what i figured out

PN# E1000-63402 is used for 1996-2000 Honda B & D series motors

PN# E1000-107828 is used for 1992-1995 Honda B & D series motors

SO

I guess I am using PN# E1000-107828

opinions?

bbarbulo

iTrader: (2)

you may possibly want to consider using an integra one? - should mount the same

imported_JookSingKid

I have considered that, but I don't have acura PN#s

The B20 in the CRV, the B16 in the SiR, and the D16Y in the Si all use the same filter, so I am assuming it would be safe to go with stock

Buff 'n Stuff

As far as I remember, the location of the fittings are different. On the Civic, one line goes to the top and the other to the bottom of the filter. On the Integra, both lines go to the top of the filter (beside each other). I'm not sure on this one. If I were at work, I could check the differences. If you can wait until tomorrow evening, I could get back to you on it for sure.

bbarbulo

iTrader: (2)

Buff, Integra and 5th gen Civics share this quality, the 6th gen ones have the one on top, one on bottom design.