charmz18

i recntly bought a 4 door ek an i have a b series motor an i want to put it in could i get some advice on what i need to put it in an how much money an parts i need for this sawp thank you for any help

bengali548

computer, conversion harness, tranny, drive axles, mounts, kreon fluid for your AC, depending on your series an oil catch can

Christof

depends on the B what is it from? you might need alot of things

Lonely Racer

well if u have the motor only then u need tranny, mounts axles and ecu, u can use a obd2 ecu will plug right in as long as u have one for ur motor or u can go obd1 and then u need a covertion harness from obd2 to obd1 and ecu, if u have ac and wanna use it u need the bserious ac brakit, and if ur adding a vtec motor u will have to add some wires

megomaniac

mounts: A combination of stock civic and integra mounts can be used if a hydraulic b-seris transmission is used. On some 96 and up engines, you may need to change the bracket under the timing belt and on the rear of the engine for ones of the appropriate year.

ecu: use the ecu that came with the engine with proper modifacation to wiring.

axles: 94 up integra axles, 94-97 delsol vtec axles or 99-00 civic sir axles

shift linkage: 99-00 sir linkage for civics,

upper rad hose: for engines with b16a head or type r , use 94 delsol vtec, for engines with b18c head use 94 gsr

lower rad hose: 94 delsol vtec

throttle cable: b16a head use 94 delsol vtec or 99-00 sir, b18c head use 94 gsr cable. for type r head use 98 type r cable

air conditioning: 97-97 delsol vtec ac bracket


The b seris engine swaps into these year vehicles are by far the easiest. There are Honda mounts available to bolt these engines in directly using delsol vtec mounts, delsol mounts are the same as 94-up integra mounts with the exception of the ac bracket

orthow

wow is this place becoming the home for spoon feeding or what?

Does anyone even attempt to do their own research?

thread fail..

chris_v2

First step:

Give the vehicle to chris_v2 and zeeman to ensure the work is done right

Jonsin

i swear there's like a million walkthroughs on this... one search on google

JDM_Ek

if your ek is 99-00 you need a conversion harness.. 96-98 your ok

seanv98

I agree. No B.S. with their work.