emission test??
#1
emission test??
i went to get the emission for my 94 civic with b16a2
and it failed every single test very bad..
what might be the possible reason for those??
the figures are mostly more than double the limits..
is there anyone who could help me with the e-test??
help will be much appreciated.
and it failed every single test very bad..
what might be the possible reason for those??
the figures are mostly more than double the limits..
is there anyone who could help me with the e-test??
help will be much appreciated.
#11
ask your mechanic to check for you, in that motor i believe there are 2 of them....is it ODB1 or 2?
i am not an expert on motors by any means, i will move this to performance section where you are get more detailed answers.
i am not an expert on motors by any means, i will move this to performance section where you are get more detailed answers.
#13
It could be a sensor, but as you have a different engine getting it tested under the hot rod category would be a good idea as your don't have a stock engine anymore. If you test under hot rod it bumps up the legal limits.
Take a look at some of the posts on the old form,
http://www.torontocivics.com/tccforu...hlight=Hot+rod
http://www.torontocivics.com/tccforu...hlight=hot+rod
http://www.torontocivics.com/tccforu...hlight=Hot+rod
Take a look at some of the posts on the old form,
http://www.torontocivics.com/tccforu...hlight=Hot+rod
http://www.torontocivics.com/tccforu...hlight=hot+rod
http://www.torontocivics.com/tccforu...hlight=Hot+rod
#14
#18
if the displacement is different, then yes, the car is considered a hot rod. so if you had a D16Z6 and went to a B16A, then it would not be a hot rod.
#19
Interesting. But I know of guys with a turbo D16 and had to get tested under hot rod. There was no change in displacement with the turbo.
#20
I really appreciate for your helps so far..
i got recommended to change the following things..
just wondering how much would it cost roughly to get these things changed including labour.
or can someone recommend me any shop that can do the job cheap and good??
- fuel filter
- spark plugs/wires
- Distributor cap
- PCV Valve
- catalytic converter
- 02 Sensor
i got recommended to change the following things..
just wondering how much would it cost roughly to get these things changed including labour.
or can someone recommend me any shop that can do the job cheap and good??
- fuel filter
- spark plugs/wires
- Distributor cap
- PCV Valve
- catalytic converter
- 02 Sensor