B and D Series Parts
#1
B and D Series Parts
Hey Guys.
Just a quick question. I know d series injectors/rails are the same as b series...correct me if im wrong. My question is...i heard that you can use a d series MAP sensor on a b series engine....is this true??
Thanks.
Just a quick question. I know d series injectors/rails are the same as b series...correct me if im wrong. My question is...i heard that you can use a d series MAP sensor on a b series engine....is this true??
Thanks.
#2
D and B-series fuel rails are NOT the same.
all B-series injectors are 240cc
most D-series injectors are 240cc
obd0 B and D-series injectors are both peak and hold (low impedence)
obd1 and obd2 B an D-series injectors are saturated (high impedence)
I've used D-series MAP sensors on B-series and H-series engines now, TPS sensors are interchangeable too.
all B-series injectors are 240cc
most D-series injectors are 240cc
obd0 B and D-series injectors are both peak and hold (low impedence)
obd1 and obd2 B an D-series injectors are saturated (high impedence)
I've used D-series MAP sensors on B-series and H-series engines now, TPS sensors are interchangeable too.
#6
i've seen people even use h22 and s2000 throttle bodies on their b-series engines. They're all pretty much interchageable, its just depends on if your car is equipped with a FITV (fast idle thermo valve) or not.
The s2000 throttle body just doesn't have an idle screw to adjust the idle (if necessary).
The s2000 throttle body just doesn't have an idle screw to adjust the idle (if necessary).
#8
i've seen people even use h22 and s2000 throttle bodies on their b-series engines. They're all pretty much interchageable, its just depends on if your car is equipped with a FITV (fast idle thermo valve) or not.
The s2000 throttle body just doesn't have an idle screw to adjust the idle (if necessary).
The s2000 throttle body just doesn't have an idle screw to adjust the idle (if necessary).
civicej1 glad to see your posts lately have been pertinent to the topic.
#9
All honda 4 wire 02 sensors will work on B,D and K engines.
Older obd-0 B16's you can use a A6 dizzy cap.
LS rods only in a A6,Z6,Y7 and Y8.
B16a2 IAC valve will work on a Y8.
Hondas all so share the same fuel injectors, fuel pumps, speed sensor, clutch slave, oil filter. I'm sure theres more buts that's all I can think of right now??
Older obd-0 B16's you can use a A6 dizzy cap.
LS rods only in a A6,Z6,Y7 and Y8.
B16a2 IAC valve will work on a Y8.
Hondas all so share the same fuel injectors, fuel pumps, speed sensor, clutch slave, oil filter. I'm sure theres more buts that's all I can think of right now??
#10
All honda 4 wire 02 sensors will work on B,D and K engines.
Older obd-0 B16's you can use a A6 dizzy cap.
LS rods only in a A6,Z6,Y7 and Y8.
B16a2 IAC valve will work on a Y8.
Hondas all so share the same fuel injectors, fuel pumps, speed sensor, clutch slave, oil filter. I'm sure theres more buts that's all I can think of right now??
Older obd-0 B16's you can use a A6 dizzy cap.
LS rods only in a A6,Z6,Y7 and Y8.
B16a2 IAC valve will work on a Y8.
Hondas all so share the same fuel injectors, fuel pumps, speed sensor, clutch slave, oil filter. I'm sure theres more buts that's all I can think of right now??
There are soooo many parts that are interchangeable its not practical to list them all.
#12
I was just throwing some parts that are interchangeable b and d not what part number is the same.
Thanks again though
Last edited by T-MacK; 07-Feb-2009 at 08:36 AM.
Thread
Thread Starter
Forum
Replies
Last Post
dub-del-sol
Honda Civic (+ other) Parts/Accessories for Sale or Trade
2
21-May-2011 07:51 PM
hatchie
Honda Civic (+ other) Parts/Accessories for Sale or Trade
0
16-Mar-2010 10:19 PM
1sloVento
Honda Civic (+ other) Parts/Accessories for Sale or Trade
0
18-Jun-2009 12:35 PM
imported_vicsir
Honda Civic (+ other) Parts/Accessories for Sale or Trade
0
26-Sep-2007 08:01 PM
1sloweg
Honda Civic (+ other) Parts/Accessories for Sale or Trade
8
06-Sep-2004 02:10 PM