B and D Series Parts
Hey Guys.
Just a quick question. I know d series injectors/rails are the same as b series...correct me if im wrong. My question is...i heard that you can use a d series MAP sensor on a b series engine....is this true?? Thanks. |
D and B-series fuel rails are NOT the same.
all B-series injectors are 240cc most D-series injectors are 240cc obd0 B and D-series injectors are both peak and hold (low impedence) obd1 and obd2 B an D-series injectors are saturated (high impedence) I've used D-series MAP sensors on B-series and H-series engines now, TPS sensors are interchangeable too. |
i heard B series TB can be used on D series motor. true?
|
YES! True.
x2 for what Andrew stated above. |
Originally Posted by High_In_Fibre
(Post 1371654)
YES! True.
x2 for what Andrew stated above. |
i've seen people even use h22 and s2000 throttle bodies on their b-series engines. They're all pretty much interchageable, its just depends on if your car is equipped with a FITV (fast idle thermo valve) or not.
The s2000 throttle body just doesn't have an idle screw to adjust the idle (if necessary). |
Alright thanks a lot zeeman. Sry about the fuel rail part....i knew they were different.
Good info to know. Thanks again. |
Originally Posted by civicEJ1
(Post 1371653)
i heard B series TB can be used on D series motor. true?
Originally Posted by zeeman
(Post 1371657)
i've seen people even use h22 and s2000 throttle bodies on their b-series engines. They're all pretty much interchageable, its just depends on if your car is equipped with a FITV (fast idle thermo valve) or not.
The s2000 throttle body just doesn't have an idle screw to adjust the idle (if necessary). civicej1 glad to see your posts lately have been pertinent to the topic. |
All honda 4 wire 02 sensors will work on B,D and K engines.
Older obd-0 B16's you can use a A6 dizzy cap. LS rods only in a A6,Z6,Y7 and Y8. B16a2 IAC valve will work on a Y8. Hondas all so share the same fuel injectors, fuel pumps, speed sensor, clutch slave, oil filter. I'm sure theres more buts that's all I can think of right now?? |
Originally Posted by T-MacK
(Post 1371783)
All honda 4 wire 02 sensors will work on B,D and K engines.
Older obd-0 B16's you can use a A6 dizzy cap. LS rods only in a A6,Z6,Y7 and Y8. B16a2 IAC valve will work on a Y8. Hondas all so share the same fuel injectors, fuel pumps, speed sensor, clutch slave, oil filter. I'm sure theres more buts that's all I can think of right now?? There are soooo many parts that are interchangeable its not practical to list them all. |
Gotta love honda parts and their interchaneability.
|
Originally Posted by zeeman
(Post 1371834)
actually different model cars use different volume fuel pumps, so they're not all the same, interchangeable yes, but the same NO.
There are soooo many parts that are interchangeable its not practical to list them all. I was just throwing some parts that are interchangeable b and d not what part number is the same. Thanks again though :rolleyes: |
Originally Posted by ol Dusty
(Post 1371779)
civicej1 glad to see your posts lately have been pertinent to the topic.
|
All times are GMT -4. The time now is 08:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands