ekhatch

ok, so bulbs are in the headlights, ballasts are in place, u pluged the bulbs to the ballast and on each bulb it has a connecter to plug to the oem h4 harness, so i pluged everything to the battery etc, but my high and low are working only as the regular peanut bulb not the actual hid. there is another connecter wire on the harness but where iconnect it

ekhatch

ok so it works if i plug just the ballast to the bulbs and oem harness no aftermarket relay harness and fuse from the battery.....is this good or bad for the oem harness wiring? basicly i have bulb, from bulb both wires to ballast and also from bulb a connecter to the factory harness, this is on both sides the same

D.T.P

Hard to follow but I believe this is correct.

ekhatch

yah seems to be working proper now, im just not using the hid kit wiring harness and relay, i put the bulbs in the housing, pluged the 2 small connectors to ballast, the bigger connector to ballast and pluged the last connect to the oem honda headlight harness and it works...

D.T.P

thats how mine are wired. the only thing is that i do not have hi/lo since i got tyc projectors im only using the hid's for the low beam. but yeah mine are wired same way.