00redline

this dosn't happen everytime but evrytime i take a coner or drive shright its makes a sounf like the break sheild is hitting the rotor...but im not sure is that could be it..never ever did this before...i checked my tie rods their fine and my lower ball joint is fine too...can anyone help me out

driven905

have you checked the brakes ? maybe they are low and reached that annoying piece of metal that makes noise when the brakes are low ...

or check the actual shield .. just take the wheel off, put the car in neutral, and spin the wheel to see where it makes noise from ...

fingolfin

CV joint

Midori

what year??? if its old the brake shield do rot away from the center of the hub very frequently and begin to flop around and rub.

Also I saw on another post that your lowered and it rubs on the wheel well lining.. perhaps the liner is dangling.

if its click click click the you most likely need new CV joint... you can check this problem by feeling around the boot if it dry then your most likely good. if you pull out your hand an you have grease all over it youll need to replace them.

I think driven905 has the best guess and solution to the problem.