2000 ek

Can use my stock p2p ecu on the jdm d15b motor? If not can yu help me out on whats a good ecu to use?
Thanks for the help guys!!

ol Dusty

iTrader: (2)

it should work, depends on what d15b exactly. year varies. things like a knock sensor might be an issue, tho if you hunt around you can find a way to trick your ecu for that, tho I don't think d series have a knock sensor anyway. otherwise as long as your reusing your current intake/exhaust manifolds and distributor your ecu should run the motor fine. if this is a vtec motor going in and a non vtec ecu then no, you'll need a diff ecu to run vtec and you'll need to run 2 wires to the ecu and another to ground.

2000 ek

Obd2 and yess ecu for vtech and the motor is also mu ecu is obd2 and motor will he as well i just was curious since the motor is from a japan civic if i can, still use my ecu or if i had to get the ecu for that motor because jdm doesnt give me a ecu with the motor and didnt,have a answer for me,about running my stock ecu

ol Dusty

iTrader: (2)

the only reason it wont work really is if you have a rare 3 stage vtec version of that motor but I kinda doubt that. Otherwise the issues you would see would be sensors on the intake maybe, but if you keep your old intake manifold, dizzy, alt etc. and harness it should be fine.

lynden

mine a p08 if that helps