mcwillyph

hey just wondering if the suspension from a 95 integra will work in a 91 hatch. but the integra came with tokico blue's in it i was kinda hoping to using them instead of buying new. and seeing as how i am changing it to disc brakes too

D.T.P

Yes it will work. The EG/DC suspension is identical, and just slightly different in EF. The only real difference is the valving since EG/DC is heavier so they are valved just slightly firmer and the front strut bottom is just slightly fatter. So if you use the DC forks (which are identical to your EF ones) you will have no problem. If for some reason you must use your forks I'm sure the alight difference in the opening on the fork can be gained if you pull both bolts out of it and try spreading it with a fat screwdriver.
For the back struts as I mentioned above, the only real difference is the valving. But the difference will probably will not even be noticeable, especially if you are upgrading from stock to tokicos.

kickz

iTrader: (1)

i got DC forks if you need pm me

D.T.P

Oh and since we are turning this into fs thread I got DC/EG and DA/EF forks if you need.
Lol!

mcwillyph

thank you very much saves me a lot of money not having to buy new suspension... i'v got the forks kicking around here somewhere

D.T.P

Good luck with the swap, be aware that the rear LCA bolts are very likely to snap and stay inside the bushing.