Scrid3r's Build Thread [pictures]
 

So here is the build thread. It has been long overdue. So here it goes, after getting rid of the DA integra i had i picked up a 92 hatch with a b20 swap.
Attachment 28222
Attachment 28223
Attachment 28224

Got myself some coilovers, Falken ze912, Blox lower control arm and a lower tie bar.
Attachment 28225
Attachment 28226
Attachment 28227

So looking pretty clean now, time for real mods soon.
Attachment 28228
Attachment 28229
Attachment 28230

Went to the track just to see what it would run.
Attachment 28231
Attachment 28232

Ok enough of this. So i started a b20vtec project, seeing how i would spend a lot of money at the machine shop and the power outcome would not be nowhere close i started thinking of alternatives.
So i picked up another b20b block and a b16 head.
Attachment 28233

Got it up on a stand and started taking it apart.
Attachment 28234
Attachment 28235
Attachment 28236
Attachment 28237

Checked the bearing clearance and its still good and within factory spec.
Attachment 28238
Attachment 28239

Cleaned up the pistons AND here is the solution for the possible lack of power i was thinking about.
Attachment 28240
http://i413.photobucket.com/albums/p...d/DSC00152.jpg

Got the turbo for a very good price, couldnt say no. From what I've read about this turbo, it is good for about 400whp so hopefully my information is right. Either way, the engine will see probably around 250-260whp. Still very many things left to get and I'm hoping ill have this done by September.

Let me know what you guys think. :smile:

i think that's awesome. i lol'd in a good way when i saw the solution to the lack of power :)

can't wait to see the new 1/4 times

lol looking good bro
dont give up!

so ur gunna crvtec on boost? i wanna see it

very nice man

Car looks great so far! A lot better than the DA.

What snail is that? Specs please. :p

Thanks guys,

Dan, dont hate the DA lol i had fun with that. lol
Here are the specs of the turbo
Compressor Wheel :
Inducer Dia.: 52.mm
Exducer Dia.: 68.07 mm

Turbine Wheel :
Inducer Dia.: 55.8 mm
Exducer Dia.: 49 mm

Borat style" VERY VERLY NICEEEEEE!"

*sit staring at screen awaiting more*

can't wait to see this thing boosted.... btw Martin I'm so tempted now after yesterday... you know what I'm talkin about lol....

Saw this posted over on TI... Lookin good! :thumbup:

Nice, cant wait for the out come. If you need something else for the b16 head like brackets or bolts just PM me. Ive got quiet a few parts.

Very nice,good luck with the build!! i got a buddy starting a b20 vtec swap aswell