nigmafrost

So I finally got to take pictures of my ride after the rims and my drop. Hope you all like it. The pictures have been edited with magic for perfection

Let me know what you guys think!

Taken with Canon 40D 50mm prime 1.8/F





Enjoy!

cr8tive_leo

It almost looks like mine... okay, nothing like mine, looks sexy though... MOAR!

nigmafrost

thanks man! the car is soo low now lol

Trybal

niiice

The best is when you step out of the car, then you almost fall on your face because the ground is so much closer.

k_r_a_c_k_e_r

iTrader: (3)

Nice, but it sure doesnt look that low?

nigmafrost

here are some more pics I took and edited.... and a picture of the low drop also...






more of my work can be viewed on Gallery and Welcome to ienvision.ca

thanks again!

spike

looks good, but that is not low yet. This is low, my old civic.

nigmafrost

yea that is lower for sure! thing is, my cars got 18s on it. so it looks lower. but my rear right tire is rubbing on the fender. rear is cambering with honda specs. so they arent gonna wear that bad which is good. the rear left doesn't rub at all over bumps, but the right does alot

cr8tive_leo

low low low and slow slow slow...



mmmm... yes, I have idfferent suspesion in the front... I dunno.. jsut to be different I gues.

nigmafrost

but i dont get it. my rear left doesnt rub at all when i turn right lets say at about 50 - 60km but if i turn left from a red light at 20 - 30km the rear right is snatching the quarter panel and rubbing against the fender. both sides are pre-rolled. but the right rear seems to be not as well rolled as the rear left. would that cause the rub or what is going on? im thinking maybe the spring is cut shorter or my frame is lower on the right side. but thats unlikely :S both sides are cambered and alignemed properly at honda and i was there both sides cambered the same. so i dont get it, why is it doing it! its driving me completely insane! front left and right dont rub, rear left doesnt rub. but the rear right does everytime i turn left or go over a bump straight. can anyone help or suggest? im going to hammer the fender in a lil next week to see if its because its sticking out to much.

on and their 18" rims with eibach sportline 1.4" drop and with the eibach pro alignment (camber kit)

cr8tive_leo

Pre rolled?

Could be your toe. Could be you sitting in the car... more weight on one side than the other.

I only rub when I hit a really deep bump. Always on the same side, rear right. Or is it rear left.. I need to pay attention next time. Maybe tuck slightly more. Hard to guess without seeing yoru car and the setup.

spike

having more onthe left side would make it rub, not the right. The camber mite be off, on the right side, and the toe could also be off.

nigmafrost

yea, it could be the camber and toe. but i was at the shop with my friend who is a mechanic at honda and we checked the numbers and made sure they were very close to one another. so both sides are almost identical.

ahm, it rubs even when im the only one driving, if i turn left or go over a fairly deep bump the rear right rubs, never the rear left, but if i turn right the rear left never rubs. if someone is sitting in the passenger seat, its even more noticeable then. i will take it into the shop again next week and recheck the alignment and hammer the fender in a lil more.

when i feel the fender on the rear right side. it feels a bit bigger on the inside than it is on the rear left so i might be that its sticking out to far and when the tires goes up, it rubs. ill even take a picture of the tire and show you guys where exactly its rubbing.

1PhatCX

not to sound like a dick, but thats not low lol

this is low!

k_r_a_c_k_e_r

iTrader: (3)

I couldnt aggree more Derek!..

1PhatCX

lol and im still gonna rock my NTLOENUF plate haha

k_r_a_c_k_e_r

iTrader: (3)

I need to get new personal pates for my new project!

1PhatCX

i like new projects! whats is it? hopefully something on air

k_r_a_c_k_e_r

iTrader: (3)

Cant say what it is yet!.. but you'll like it forsure!

1PhatCX

lol alright, well ill keep my eyes peeled for a build thread on it