Wiper washer problem
 

Well I let the wiper washer reservoir run dry for a couple days and when I put new fluid in it just wouldn’t spray?? I’m hoping it’s just frozen but I’m preparing for the worst. So I was looking around the reservoir and I can see a motor on top of the reservoir but in my service manual it shows it at the bottom of the reservoir and you have to take the bumper off to get at it. Which is it and does any one have some hints or tips at fixing this

mine is at the bottom of the reservoir(motors/pumps)....i just turn my drivers wheel out and move the peice pf plastic out of the way ot get to the motors/pumps, its a little tuff...but to remove the resevoir compleatly...i do belive you have to remove the bumper

Motor's on the bottom.... Do you hear the motor trying to spray? If so, then the motor's probably fine.. Get the car into a garage and leave it for a bit..

If the motor's gone then like Nash said, you can out the driver side wheel well lining and it's right there.

^^ dito get her inside for a few hours to de-ice the car then you will know forsure... who knows it could be as simple as a fuse.

so I went for a movie over at the Grand (they have indoor parking) and now things are as good as new!!!

Thanks guys