Creepin_B

hey, i had a civic and on my old harness from the deck to harness the remote wire was seperate out of the back of my deck, to wire to the remote wire from amp.. now i got this 240sx two piece harness, i soldered and heat shrink tubed all the color coded wires which leaves me with a blue cord with white stripe, i have 2 of them, one is coming out of the deck that i had wired to the amp in the civic, and now the harness has one coming out of it as well.. wtf do i do with the second one? confusing stuff.. and now i've bought a second amp, and 2 sets of RCA's for both amps.. where do i wire both remote wires from the 2 seperate amps too? do i put them together with the wire from the back of the deck or what? this may sound confusing.. here is a diagram of my question:
http://img42.photobucket.com/albums/...e_question.jpg

imported_loudsubz

the one on the harness is most likely a power antenna

imported_loudsubz

just double up on your remotes for both amps coming off your deck

dont run more than 2 before using a relay

Creepin_B

no the harness one specificaly says, "AMP Turn-On (12+)" and it is blue with the white stripe like remote, but now that i got the amps remotes figured out, what do i do with the harness one..?

imported_loudsubz

does the 240 have a built in power amp? if no then leave it... if yes and you need it to rum the speakers connect it...

but since u added another amp whats that powering

Creepin_B

the 6x9s as shown in the diagram

imported_loudsubz

try without it then

Creepin_B

ill see what happens, this is the easy part, i just bought the car and the guy cut the cars harness out, now the trickey part doing it the right way finding out which wire is which and trying to solder and heat shrink tube the wire connections right in the dash!

imported_loudsubz

you could have just got spade connectors and soldered both ends of the wires then attached them that way too, another method

Creepin_B

wanted the deck disconnectable.. and the wires on the cars harness are fawked there all different bright colors with bright stripes.. duno wut ill do

imported_loudsubz

yes thats why i mentioned spade connectors.... then u could have taken out the harness too if u ever needed