ryan_77

iTrader: (2)

so i picked up power window and lock conversion for my ek hatch. it came with the full panels, glass, and tweeters(cant be used untill i get power mirrors ) i need a couple of harnesses though. look at pics and who can get me these parts or sell me them? also who can lead me to a diy on the install?

everything

glass

panels

panel stuff

are these the only wires for the motors? and which goes on passenger/driver?


this is the handle for the lock switch(driver side). i need this clip.

this is passenger side window switch.

this is driver side window switch, i guess i really need this harness


thanks for any help,
ryan

Midori

go to standard auto wreckers tomorrow (free parts day), find a 4 door eg with power window grab both door harnesses and as much as the floor harness as possible you ll most like only be able to grab the section that goes from the inside fender to just inside the dash... also look behind the fuse panel for a plug that has green/black, yellow/black, blue/black ect and take that as well. now with these find the wiring diagram and reassemble it using wire purchase for were ever. install the new pieces run the wire plug everything and don t forget the new fuse in the indash fuse panel. you ll Also need to convert the 4 door harness into a 2 two door harness (omit the yellow and green wires..

using this method will also set you up with power mirrors as well

Do you have the plug of the driver controls? if not pull a couple plug from other two door hondas i believe they are all the same minus the wire order.

for the locks well you ll need the relay box and actuators... I am not familar with the wiring process for that part.

I did this on my eg hatch work perfectly.

ryan_77

iTrader: (2)

i have an ek tho is it the same?

driven905

hatch and 2 door are the same as far as i know

Midori

yes its the same... well maybe the plug on the back of the fuse might be different the wiring is the same otherwise...