eurolite reverse light gauges help!!
 

hey i have these eurolite reverse light gauges that use to work just fine. But one day they just started cutting in and out and eventually just stopped working. Ive checked the wiring, and its all connected properly. There are no loose connections. Does anyone have any suggestions, Im thinking the transformer has a problem but im no good with that type of stuff.

do they have bulbs? are you able to check them? #basicbellcsrtroubleshooting

no theres no bulbs...they are your spedometer, gas, battery, engine temp gauges. they are flat face plates that replace your regular looking gauges.

Try rewiring it, checking grounds, use solder if you wired them.
(you said you did all that) Look for corrotion(sp?)

Finally, measure voltages. All I can suggest atm.
-B

do what F8i is telling you..

also research that gauge. maybe other people have experienced the same thing?

are these the gauge?? oe something like this

Attachment 28638


There isnt much you can do , just check power and ground. Mine actually went out one day and came back after two days , and i didnt even do anything , it just came back one day :confused:

you could also remove the cluster to make sure the power or ground wire got cut. I know i had a hard time closing the plastic cover for my cluster with the power and ground wire in the way. I actually had to force the plastic cover on top of the wires , so sooner or later it may get cut...

thanks for the info guys..really great

did u fix the issue?