imported_dragon208

has any1 tried to put in EK coupe SI seats into an EF before.. Mine are ripped up and my friend is giving me a set of Si cloth seats into my EF.. wondering would it be easy to install, or will i need to do alot of work..
thanks

Cynikal.Mindset

I hope u are short and or enjoy rappin your head off the roof

cibs

Younes Si

yup..i have ek seats in my eg and i'm sitten pretty high as is

Tego

GSR seats is the way to go!

imported_twinbros

Can someone answer his question?
Is rail swaping a option etc?

imported_dragon208

bump?

imported_blkzc

they wont bolt up at all. You have to move the hole pattern in and build custom brackets. If you look at your floor one corner sits almost two inches higher then the other and the belly pan of your seat compensates for this. Well the bottom of the EK seat is flat so you need to make some kind of riser for that corner aswell to even out your seat. Not easy to do but can be done. you will sit really high though. Before you start take out one of your seats and put the ek seat in on a piece of wood to even it out and see if you like it first.

imported_dragon208

hummm.....thanks for the tip!

imported_angryasian

i have the same problem, tryin to fit 98 dx seats into my 91 si, they sit kinda high....
and the back seat is too wide

imported_dragon208

so ur using the dx seats now?? lol.. I've decided to go with aftermarket racing seats instead since their tooo high.. lol..

imported_EK2NV

dont do it, i reccomend 90-91 Si seats there 1 of the best seats honda came out with

imported_angryasian

im trying, but its not quite working lol
im gonna have to make some modifications to the front seats, already modified the rear bench to fit