Eg Power windows seizing up.. any advice..
 

In my eg hatch the power windows are seizing a bit rarely stopping but they usually just slow down alot in the mid range of moving up or down...

so far lubing hasn't done much...

any better ideas...?

I've got a similar problem with my manual window. i tried to fix it but now the crank wont turn at all :-( IS there a shop or someone who can change the whole window mechanism? Its such a b.s job

I'll keep searching and let you know any info i get...

I've changed the rubber pieces where the window slides so i know that isn't the problem....

so kno1 has had and fixed this problem...?

try replacing ground. sometimes if the ground is poorly rusted electrical current wont push as much. Replaced mine on my 96 ek and there working good again. I just did the ones on the engine and the starter but you might want to try the ground on the harness for the the window

what kind of lub ??? have you used grease ? I know wD40 only work temporary. also if you have it in your hatch that means you have a custom setup.. check your window motor and harnesses.

Mine are kinda slow to....

silicone spray lubricant ftw :P

Also I use that stuff in the winter time when I wash my car to prevent the doors & windows freezing shut.