imported_Tommygunnz

In my eg hatch the power windows are seizing a bit rarely stopping but they usually just slow down alot in the mid range of moving up or down...

so far lubing hasn't done much...

any better ideas...?

suno_eg

iTrader: (1)

I've got a similar problem with my manual window. i tried to fix it but now the crank wont turn at all :-( IS there a shop or someone who can change the whole window mechanism? Its such a b.s job

imported_Tommygunnz

I'll keep searching and let you know any info i get...

I've changed the rubber pieces where the window slides so i know that isn't the problem....

so kno1 has had and fixed this problem...?

imported_slowandfurious

try replacing ground. sometimes if the ground is poorly rusted electrical current wont push as much. Replaced mine on my 96 ek and there working good again. I just did the ones on the engine and the starter but you might want to try the ground on the harness for the the window

imported_Midori

what kind of lub ??? have you used grease ? I know wD40 only work temporary. also if you have it in your hatch that means you have a custom setup.. check your window motor and harnesses.

Mine are kinda slow to....

imported_starboy869

silicone spray lubricant ftw :P

Also I use that stuff in the winter time when I wash my car to prevent the doors & windows freezing shut.