which amp should i use?
 

:help:i have a kicker L7 (1500w750rms) sub and im wondering what type of amp to run it with. i hav a kenwood kac-7252 2channel amp but im not sure it will power it. also what other parts do i need to make it run properly? im a complete noob when it come to audio so laymans terms would be good. thx 4 ur help

The Kenwood amp will not power that sub properly, you should be looking at an amp that will push 700-1000 watts to play that sub properly.

if you can get a hold of one, rockford fosgate 800a2.

a bit older, but its great for that speaker.

jus stumbled on a kicker zx450 amp $400 tho. i think this will run it. any feedback?

For $400.00 you can get a bigger amp than that. The zx450 only puts out 450 watts you need more power than that.

I have a PPI pro A600.2 I would be willing to part with for 400$. solid solid amp!

whosyodaddy16@hotmail.com if your interested

thx 4 the advice and the offers. bad news is i might have 2 wait a week or two. i hit a pothole or morelike potcanyon and now i have a slow leak. wasnt speeding jus crusin with the flow of traffic. thx again tho.

Holly **** almost asking double the going rate for an A600.2 Besides that amp only does 600wrms x 1 @ 4 ohms. For another $100 or so you can get the PPI A1200 or A1200.2 which does double (1200wrms x 1 @ 4 ohms)

Is your sub a svc or a dvc and what ohm rating? I would look somewhere in the 700+ WRMS and NOT max ratings.

Another good amp IMO is the ALPINE PDX 1.1000 1000wrms+ @ 4 or 2 ohms on paper. Class-D amplifier design Which is pretty good to help save your electrical system. 80amp total draw vs 160amp with that A1200.2 or 60amp on that A600.2 Plus they're cheap on ebay looking around $500 MAX brand new one or around $400 for a used one.