imported_Team Rukus

So I want to do some upgrades to my civic in terms of mechanical components.

what are some of the things i can do???

so far i upgraded to mugen active brake kit
stainless steel brake lines
extended wheel studs
stainless steel clutch line
complete exhaust from header back
tie bar
strut bar
c pillar bar
rear strut bar
front/back sway bars
es bushings

what more can i do? i dont want to do any engine mods (ie. internal parts) because i will be going k next year so no point in dumping more money. Imo i just want everything stock to be replaced with aftermarket parts.

I am more concered about all the little fine detailed parts or items i can change over the big easily recognizable parts. Btw this car will be 100 percent street legal in everyway so please dont post mods that are illegal in terms of road safety.

imported_mugenpowered

That's pretty comprehensive,

But maybe
-lower control arms
-adjustable coilovers or lowering spring/shocks, with a camber kit
-subframe reinforcement kit (depending on the size of your sway bars)
-quick clutch kit

Pimpin-EL

afta market rad? Afta market Rad cooler thingy...tow hooks...H-brace bar....Go on honda-tech sponsered websites...they have a ****load of bling items tat seem to not make much sense...

maca

put stickers all over your car advertising what you have in it.

imported_hdave

system?

Type_R Del Sol

girls?

imported_Moe_Mentum

You could upgrade the BB/MC to a larger size, Short Shifter, maybe get an MSD ignition.

imported_360_vortex

5 lugs?

kwasley

k-sport lcas

imported_Team Rukus

i already have ingalls camber kit, lower control arms, 5 bolt, ctr subframe, ctr steering column, ctr B/B and M/C, Tien H/A Full Coilovers....i was looking into a radiator but i decided not to get one because 1 they are useless unless for bling factor and 2 i will be getting a k swap anyway so its a waste of money.

anything else i can change or upgrade???

imported_alwaysoverkill

korbach frame locks, supposed to make a difference but i don't know alot about them. clubsi.com has a review and info and i'm sure H-T will too.

IMO you've got all the bases covered for suspension provided you've considered good rubber like Azeni RT-615 or Hankook Z212's. Something that is going to give you the grip your after to put that suspension to good use

kwasley

vision shift ****.
ctr seats.
ctr floor mats
ctr carpet
optional navagation unit
whale *****

just some things i would do.

Nova_Dust

May be a little late now Jay, but I would have seamwelded the chassis while it was bare naked.

That's the only mod I would do if I had the chance to strip the car, and a cage of course.

imported_hdave

u gonna do k series swap??

Pimpin-EL

Lug nuts....get the blingingst 1s....Ground wiring system....VAFC.....The whale ***** wont be transferable to the K

imported_GoldBadge

HID Kit

Pads / Rotors (unless that's what the 'Mugen Active Brake Kit' is)

I think there are two other interor bars you can install. One that mounts behind the seats (do luck bar?) and one across the floor of the trunk.

imported_Team Rukus

already have all of those minus the vision shift **** i have a ctr one.


remember guys i own a ctr so most of the stuff is already upgraded but i want to upgrade from an upgrade.
and whale ***** intakes are THE GHEY

imported_Team Rukus

yea its too late. but i would never consider it anyway. since i will be street driving it and from what i hear it creaks and is waaaaay to stiff.

imported_Team Rukus

yes i am.
its nothing crazy just a k20a R motor but thats not till next year anyway.

imported_Team Rukus

yea i am looking around for tuner lugs and i am going to upgrade my wires too make the engine bay look nice. i wont be using vafc since i am going to learn how to use cromepro (if zeeman teaches me) and use that for in car tuning.