SiR_Redneck

well this is the problem, i have a full Z6 swap in my crx, i used the JKOBD ecu harness and my stock engine harness, i have everythin wired up, i have been workin on this dam thing for like 5 days now and we cant get the engine to spark. i have a MSD external coil cap running to the external coil(obviously). i have power thru the dizzy to the coil and from the coil to the cap but nothing past that, i had bought a cheap rotor from NAPA, it doesnt seem to fit right, it seems taht its not making contact with the posts in the dizzy, if some one were to know whats wrong that would be great,

P.S. i already changed the ICM with a workin one, and im runnin the stock P28 ecu. is that helps

imported_Thrill_House

You seem to have answered your own question there, you rotor is probably junk, dude there so cheap to get so go out and get a good one then try it again. BTW did you check for spark at the spark plug wires with the cap installed? That would be my next step before anything else.

SiR_Redneck

im goin to go to honda tomorow and pick up a OEM rotor from there, if it wont spark after that, im out of ideas.

SiR_Redneck

well i bought a new Rotor, Cap, ICM, have following grounds: batt to tranny, batt to body, batt to thurmo, valve cover to body. i have fuel comin out like crazy, so i know the injectors work and have no problem there, i have power to the ICM and then to the coil and on the coil tower, but no spark. if anyone knows what im overlooking it would be a great help, been tryin to get spark for 5 days now,