Civic Forumz - Honda Civic Forum

Civic Forumz - Honda Civic Forum (https://www.civicforumz.com/)
-   Honda Civic Performance - JDM Discussion (https://www.civicforumz.com/honda-civic-performance-jdm-discussion-14/)
-   -   ITR sway bar endlink on a CIVIC (https://www.civicforumz.com/honda-civic-performance-jdm-discussion-14/itr-sway-bar-endlink-civic-100139/)

SimpleG 18-Apr-2006 05:23 PM

ITR sway bar endlink on a CIVIC
 
I will be using a ITR 22mm sway bar on my 99 civic hatch with omni power control arms. im also going to be using a ASR subframe kit.

can i use the itr end links that come with the sway bar with the omni LCA or do i need to get some sir endlinks?

some help would be great
thanks

imported_alwaysoverkill 18-Apr-2006 09:17 PM

ITR endlinks do not work with EK LCA. I have a set and was planning to use them, but alas...they mount differently where as SIR/RSX-S mount to the side, so they are about 1" shorter on each side.

These are your ITR endlinks right? if so they definately they do not fit.
https://img.photobucket.com/albums/v...l/IMG_0001.jpg

imported_GoldBadge 18-Apr-2006 09:34 PM

Sorry for getting a little off track...

Are SiR and RSX-S endlinks compatable, or just of similar design?

imported_alwaysoverkill 18-Apr-2006 10:06 PM

SIR is alittle taller and thinner. The RSX-S are shorter and alittle beefier. RSX-S comes with 19mm sway bar which is why I choose it for my 23mm JDM ITR bar. SIR only comes with 13mm same as 1.6EL, so they eventually snap with the larger 22 or 23mm rear sway bars.

imported_GoldBadge 18-Apr-2006 10:12 PM

So the RSX-S endlinks will pull the ends of the sway bar closer to the LCA?

imported_alwaysoverkill 18-Apr-2006 11:07 PM

correct, its probably about close to an inch shorter. Its also beefier. It pulls the ends of the sway bar down just alittle and is what Charleston of ASR recommend when I talked to him about RSX-S or metal helm joint end-links. Don't know if there is any difference, but oh man...when I got the 23mm rear sway back on (used to have a 22mm with Beaks kit) it was amazing.

I got my endlinks for ASR, $82usd shipped to Canada.

imported_fotoboy0806 19-Apr-2006 02:48 AM

I just installed the ASR with OMNI LCR, 22mm ITR rear sway and i'm using the endlinks from a SiR, works great, haven't finished everything yet but it should be on the road by tmr!

Nova_Dust 19-Apr-2006 09:45 AM

I feel like upgrading to 32mm sway bar haha.

imported_GoldBadge 19-Apr-2006 09:53 AM


Originally posted by Nova_Dust
I feel like upgrading to 32mm sway bar haha.
Aren't those hollow?

Maybe I'm thinking of something else.

Nova_Dust 19-Apr-2006 10:17 AM

Hollow indeed, but has the strength of a 26mm solid bar (same as Mugen size).

imported_GoldBadge 19-Apr-2006 10:36 AM

Is it the Comptech one?

Nova_Dust 19-Apr-2006 10:41 AM

No, this is the ASR kit I am referring to. My plate is ready for 32mm sway bar so I can upgrade anytime.

imported_GoldBadge 19-Apr-2006 11:02 AM


Originally posted by Nova_Dust
No, this is the ASR kit I am referring to. My plate is ready for 32mm sway bar so I can upgrade anytime.
They sway bar itself is made by ASR?

Nova_Dust 19-Apr-2006 12:06 PM

I don't know but I wouldn't doubt it otherwise.


All times are GMT -4. The time now is 07:21 AM.


© 2024 MH Sub I, LLC dba Internet Brands