92extremehatch

Im going to be using a B16a cable tranny mounting it to a B18c1 gsr block, which clutch and flywheel should i be using.

is there a difference between a B16 clutch and a B18c clutch or are they both the same because exedy has them listed separetly under there site one for the B16 and one for the B18

now for the flywheel i have read that they can be used on all b series engines ? is that true

thanks for the help

civicnation

use the b16 clutch, i'm 80% sure

zeeman

iTrader: (1)

all you have to do is determine whether the tranny has the large splined input shaft or the small splined input shaft. Some cable tranny's use the large spline (26 teeth) but most use the small spline (24 teeth).
If it has the larger input shaft then you can use any b-series hydro tranny clutch. But if its the small input shaft you need a clutch from a 90-91 integra.....i am 100% sure on this.

dils926

I'm having problems finding the correct clutch disc. I have first gen b16a cable trans I've tried using 90-91 Integra disc and it's too big. I've been told to use 88-91 crx s.I.r s.I clutch disc cause its 24t small spline but don't wanna buy and it be the wrong one somebody please help me

ol Dusty

iTrader: (2)

Are you sure that the 90-91 untegra one you had was in fact for a 90-91? some times for that car you actually get one for the big spline 92-93