imported_Team Rukus

got a b16a and am in need of a fuel rail just wondering if there are other b series rails that are also compatible or do i have to ge the one for the b16a specifically?

zeeman

iTrader: (1)

you can use pretty much any b-series fuel rail.

Just make sure that if the IAT sensor is on the #2 runner of the intake manifold to get a fuel rail with the fuel pressure regulator on the end (drivers side) of the fuel rail....the 1st gen b16 and i think b17s use the round fuel rail with the FPR more to the middle of the fuel rail, and sometimes it will get in the way of the IAT sensor.
If your IAT sensor isn't on the intake manifold (obd2 b16s its on intake pipe, GSR's are on the back/top of the IM) then you don't have to worry, grab the first/cheapest fuel rail you can find.

imported_Team Rukus

got one laying around anywhere mr. z?

zeeman

iTrader: (1)

no sorry, i got rid of the last one i had just a few weeks ago....i could prolly find one though....but all you'd have to do is go to a junkyard out your way and grab one off an integra.

imported_InVaDeR_HB

i have one for ya pm me

imported_92jdmSiR

i have 2

imported_Team Rukus

check pm's both of you.

LEITNER

from what i know a non vtec b series rail will NOT work on a vtec engine the spacing is wrong for the studs

zeeman

iTrader: (1)

hmm....funny, b/c i've used 1st gen b16 fuel rail on a b20 before.....and then re-used the same fuel rail/injectors when he decided to add a vtec head (b16 head for b20vtec).