JDM_RS

im planing on 5bolt on my 95 civic hatch i was just wounderin if it bolts right up?
ppl said something about 36mm and 32 mm and im runing a dseries motor for now till i get the swap in a couple months they said something about bseries outer ends of the shafts can someone help me please? i need to figure this out if i can go ahead with no problems

JDM_RS

The JDM ITR has 36 mm axels, while the USDM ITR and JDM CTR come with 32 mm axels any one know if dx axles are 32 mm?

Nova_Dust

Yes, Civic uses 32mm axles.

imported_Hybrid_Hatch

only the 98+ jdm itr used the 36 mm hubs(28 tooth spline), the 94-97 ITR was 4lug and 32 mm (26 tooth spline)

if you get teh JDM one (36mm) and you have a b-series engine swap, then you can swap the outters on your b-series shafts for rsx type-s or 93-96 prelude vtec.

If you still have stock d-series shafts, you are screwed