**WIRING** DX to Si
 

Well the crossmember is on and the seteering is working like a charm now it's time to get the motor in but I might have a problem.

I have the engine wiring but I am missing the three harnesses that go in the plugs next to the fuse relay.

Do these harnesses just plug into the old DX plugs ?

Or do I have to move a couple of pin locations ?

I have the Si computer and I know that the computer plugs right in.

So there's your question's.

I'll be most likely doing this too:

http://hybrid2.honda-perf.org/tech/sohcvtec.html

http://www.4thgenerationcivic.com/ho...conversion.htm

Ok I got all that.

Now I am wondering how to find the pin locations for the computer.

simple... one option is to pick up a manual from whatever year/car the computer is... and the wiring diagram will have the pin reference layout.

the other method would be to take a looky in this link and check out the factory service manual online.

Well I was one step ahead of ya.

I went out and bought the chilton manual ( cuz the haynes manual didn't have the diagram).

While I was there I bought the stuff I needed to complete this step and guess what 6 hours later here I am telling you that I have already finished this step.

Now to drop this motor in !!!!!!!!!!!!!!