F.S. My COMPLETE turbo Setup Plus other parts
#1
F.S. My COMPLETE turbo Setup Plus other parts
For Sale:
I have decided that to sell my turbo kit. It has been mounted on my 93 si for about 1 ½ months and has a little less then 1500 kms on it(pretty much brand spanking new). This is a complete….I mean COMPLETE kit for sale and everything was purchased new…no second hand parts. Here are the details.
Turbo kit for a DOHC B-series setup:
-Greddy - Turbo 05h-18g c/w Internal Gate
Serial No. 020424027
M.F.D. No. 49178-05150
-Greddy Turbo manifold c/w greddy heat shield– manifold has been ceramic coated(black) at www.fireballcoatings.com
-Greddy Stainless steel oil feed line c/w off the block T-setup
-(-10) SS oil return line c/w AN fittings. (1) straight and (1)45° bend. Also included is a custom oil fitting to fit the Greddy turbo.
-Stainless steel All IC piping c/w couplers & band clamps
-ROFL BOV- LOUD ****!
-Johnny Racer Style Front Mount Intercooler c/w with mounting brackets/ bolts/ washers/ nuts. Intercooler has been modded to the “backdoor setup”. For those who are not aware of what this is…please see pics.
-440cc RC injectors c/w injector clips
-Autometer boost gauge_ silver face c/w mounting pod & hose
-Autometer EGT gauge & electronic probe c/w mounting pod
-Hondata s200 c/w boost…this also includes my program that can be used as a basemap.
- 3” Stainless steel (304 grade) downpipe c/w quick release tri-clamp ferrule connections(gasket and clamps included) & bolts, nuts, and washers. Down pipe also included two O2 bungs, one for regular O2 sensor and one for wideband tuning. This downpipe was custom made to mate up to a greddy turbo. Very rare.
-3” Stainless steel free flow cat….extremely free flowing c/w quick release tri-clamp ferrule connections (gasket and clamps included).
-3” Stainless steel(304 grade) Full exhaust, again c/w with quick release tri-clamp ferrule connections(gasket and clamps included)
-3” inlet and outlet Stainless steel – MAGNAflow muffler
This is all I can think of at the moment. I will update the list if I forget something. I made some pretty good power with this setup. You can refer to the Dyno plot attached. 265 WHP @ 8 psi on my STOCK B16a motor.
I paid well over $6000 for this setup. I’m asking $4950 for everything. If someone is interested in the turbo setup without the Exhaust setup, pm me and we will discuss the issue.
dyno plot:
http://www.hostdub.com/albums/gt28-d...PLOT.sized.jpg
Pics of my setup & ride
http://home.cogeco.ca/~spooolingtsiawd/Sam/
Other parts for sale
-2000 Integra Gsr ECU…$100..obo
-93 Si Front Seats…good condition….$90
-93 Si Power Steering Pump….$60..obo
-93 Si Cap/rotor….all mint condition…used only 1 month..$35
-93 Si Stock springs…$50
-95 Gsr intake manifold…(bare)…$50
-95 Gsr exhaust manifold… $50
-93 Si Stock Steering wheel…dark grey with airbag….make an offer
-Something completely off topic…99 Kawasaki zx7r stock exhaust…full from the header back….$140 obo
-(2) IHI f5 turbo’s…used slightly but still in mint mint condition…not carbon build up anywhere…I think they were used for about 5000 km….$450each obo
-99 Si stock tape deck…$15
-99 Gsr rear bench….$100
Thanks for looking..
I have decided that to sell my turbo kit. It has been mounted on my 93 si for about 1 ½ months and has a little less then 1500 kms on it(pretty much brand spanking new). This is a complete….I mean COMPLETE kit for sale and everything was purchased new…no second hand parts. Here are the details.
Turbo kit for a DOHC B-series setup:
-Greddy - Turbo 05h-18g c/w Internal Gate
Serial No. 020424027
M.F.D. No. 49178-05150
-Greddy Turbo manifold c/w greddy heat shield– manifold has been ceramic coated(black) at www.fireballcoatings.com
-Greddy Stainless steel oil feed line c/w off the block T-setup
-(-10) SS oil return line c/w AN fittings. (1) straight and (1)45° bend. Also included is a custom oil fitting to fit the Greddy turbo.
-Stainless steel All IC piping c/w couplers & band clamps
-ROFL BOV- LOUD ****!
-Johnny Racer Style Front Mount Intercooler c/w with mounting brackets/ bolts/ washers/ nuts. Intercooler has been modded to the “backdoor setup”. For those who are not aware of what this is…please see pics.
-440cc RC injectors c/w injector clips
-Autometer boost gauge_ silver face c/w mounting pod & hose
-Autometer EGT gauge & electronic probe c/w mounting pod
-Hondata s200 c/w boost…this also includes my program that can be used as a basemap.
- 3” Stainless steel (304 grade) downpipe c/w quick release tri-clamp ferrule connections(gasket and clamps included) & bolts, nuts, and washers. Down pipe also included two O2 bungs, one for regular O2 sensor and one for wideband tuning. This downpipe was custom made to mate up to a greddy turbo. Very rare.
-3” Stainless steel free flow cat….extremely free flowing c/w quick release tri-clamp ferrule connections (gasket and clamps included).
-3” Stainless steel(304 grade) Full exhaust, again c/w with quick release tri-clamp ferrule connections(gasket and clamps included)
-3” inlet and outlet Stainless steel – MAGNAflow muffler
This is all I can think of at the moment. I will update the list if I forget something. I made some pretty good power with this setup. You can refer to the Dyno plot attached. 265 WHP @ 8 psi on my STOCK B16a motor.
I paid well over $6000 for this setup. I’m asking $4950 for everything. If someone is interested in the turbo setup without the Exhaust setup, pm me and we will discuss the issue.
dyno plot:
http://www.hostdub.com/albums/gt28-d...PLOT.sized.jpg
Pics of my setup & ride
http://home.cogeco.ca/~spooolingtsiawd/Sam/
Other parts for sale
-2000 Integra Gsr ECU…$100..obo
-93 Si Front Seats…good condition….$90
-93 Si Power Steering Pump….$60..obo
-93 Si Cap/rotor….all mint condition…used only 1 month..$35
-93 Si Stock springs…$50
-95 Gsr intake manifold…(bare)…$50
-95 Gsr exhaust manifold… $50
-93 Si Stock Steering wheel…dark grey with airbag….make an offer
-Something completely off topic…99 Kawasaki zx7r stock exhaust…full from the header back….$140 obo
-(2) IHI f5 turbo’s…used slightly but still in mint mint condition…not carbon build up anywhere…I think they were used for about 5000 km….$450each obo
-99 Si stock tape deck…$15
-99 Gsr rear bench….$100
Thanks for looking..