d-series to b-series swap questions
22-Sep-2010, 09:09 AM
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: T.O
Posts: 67
d-series to b-series swap questions
i have a 94 civic dx hatch with a d15b7 in it. i have a b18c1/b20 Frankenstein motor waiting to be swapped in. now in order to save a lil money on the swap id like the take out the d15 my self but what id like to know is what can stay and what has to go? i have A/C and Power Steering.
22-Sep-2010, 09:18 AM
#2
Inactive
Join Date: Sep 2007
Location: Where my car is.
Posts: 5,460
You'll need an a/c compressor and power steering pump to match what ever engine block you're putting in. So the d15 a/c compressor and power steering pump can go...
Leave the rad/heater lines/hoses. I believe you should leave the wiring harness as well.
Do you know which motor mounts you need?
Leave the rad/heater lines/hoses. I believe you should leave the wiring harness as well.
Do you know which motor mounts you need?
23-Sep-2010, 02:29 AM
#6
Member
Join Date: Oct 2007
Posts: 30
Do you have the AC compressor and PS unit from the donor eg? Did the donor eg have ac installed?
I believe you can use your existing compressor as long as you get the right bracket for it. I believe you need to use a 1996-1997 del Sol VTEC bracket. (only eg/eh chassis that came with a stock B series in the USDM)
I believe you can use your existing compressor as long as you get the right bracket for it. I believe you need to use a 1996-1997 del Sol VTEC bracket. (only eg/eh chassis that came with a stock B series in the USDM)
Thread
Thread Starter
Forum
Replies
Last Post
