nemo1

iTrader: (1)

im ready to purchase my stroker kit now. I was looking at Brian Crower, is this my best bet or is there another company that has better quality. im looking for the best.

thanks

seanv98

Toda also makes a kit.

nemo1

iTrader: (1)

toda only has it for b16 tho

94JdmEg6

crower=best

nemo1

iTrader: (1)

i just dont want to pay way over priced brokerage charges like i did when i bought my block. maybe its just ups that has that.

94JdmEg6

um. where you getting these parts from? where do you live? you can get crower cams from JRP (Mississauga)

nemo1

iTrader: (1)

i phoned jrp, they said they dont cary it. brian crower and crower are different i believe. crower is for cams and brian crower is stroker kits, well thats what there website looks like. i was going to order them direct from manufacture.

zeeman

iTrader: (1)

brian crower and crower are different.

brian crower makes camshafts as well....i've had good sucess with brian crower camshafts in the past.

What engine are you building here?

Stroker kits are expensive and not really worth it IMO on hondas.

nemo1

iTrader: (1)

dart b18 84.5mm with b16a head. boosted

nemo1

iTrader: (1)

$2328.00 directly from brian crower. just look at it this way, make ur choices wisley cuz your going to be tuning her. i kno its more expensive but as a kit you kno they fit together nicely and crank is balanced ready to install

zeeman

iTrader: (1)

you want to stroke a boosted engine?

If you're after more power, i'd just turn the boost up a bit.

Thats a lot of money for something usually reserved for more power on a n/a build. I mean, people use stroker kits on boosted apps too, but the longer the stroke typically the less stable the engine at high RPMs.

nemo1

iTrader: (1)

ok sounds understandable. i want to get a kit with everything in it, brian crower only have strokers that i can see. soo what manufacture would have something like that or can you help me piece a kit together

nemo1

iTrader: (1)

ok guys, i pieced it together.

going wit CP pistons 84.5mm 9.0.1

and eagle rod and crank.


I just have a question tho, does the length of the rod change since im using a b16 head. i kno the pistons say can be used with b16 head.

and if im correct the rod is 137mm or 5.394"

thanks