imported_redSiR6g

Hey, im looking to buy SiR doors for my cx hatch and i was wondering if the doors will plug and play into the hatch, and if not is there alot of wiring involved b4 i can get all the power options??

thanks

bbarbulo

iTrader: (2)

haha... plug and play into what?? all you have in thurr is 2 wires for the speaker yes, running the wiring is challenging.

imported_BoOsTd

most likely the wires will be clipped. so yah good luck I guess you could buy new harnesses from Honda, but I heard they are fairly pricey.

bbarbulo

iTrader: (2)

B*Zex, the CX was never wired from the factory for any of those things - he'll need a complete interior harness from Honda - about $340 for an interior harness, and he'll have to remove his dash to install it.

Nova_Dust

Buddy, sometimes, power option don't come cheap and it might not worth your time and money, at all.

But, I must say, that power windows are nice.

imported_Team Rukus

bbarbulo wat are u talking about???

its more like 2000.00 dollars. u will need the main harness plus the floor harness. trust me i know i did this swap on a 4dr se (mine)

bbarbulo

iTrader: (2)

no no no... I called the dealer when I wanted power mirrors, and they quoted me $340 for the interior harness. maybe your dealer wanted to rip you a new one, or they were giving you the installed price j/k

bbarbulo

iTrader: (2)

http://www.hondaautomotiveparts.com/...5=WIRE+HARNESS

see, just gotta find the right one

imported_BoOsTd

a 2dr must be cheaper than a 4dr right? I mean thats a hell of allot less wireing.

imported_Team Rukus

hey barbulo when i did my power window.
i needed both the floor harness and the main harness.

ur talkin bout the floor harness only that is still not enough unless u wanna cut and splice.

as for boostzex doing a 2dr is cheaper then 4dr if ur gettin it done at a shop cuz they charge per door. but if ur doing it urself the rear two doors are really easy especially if its all oem stuff its basically plug and play only hard part is up front.

imported_BoOsTd

Team Rukus,

wouldnt the wire harness be cheaper too? Cuz it would only be up front? dont the floor harnesses just go to the back 2 doors?

imported_Team Rukus

nope.
the floor harness includes everything fuel/abs etc... pretty much the same price i believe.

minimatchit

Hey I have a Cx and i did the conversion. You need harnesses. I got them with my doors and someone ran the wiring for me. I think they ran it to the ecu. Not sure really. It costed me $250 to do the wiring.