Projector Install for EG Hatch (help)
#1
Projector Install for EG Hatch (help)
hey everybody
i picked up a set of denji's carbon fiber projectors for my 94 hatch
so i was wondering if anybody can help me out with a site where it gives u step by step instructions
cuz i don't want to mess anythin up..!
or if anybody can give me some info that would be appreaciated also..!
i picked up a set of denji's carbon fiber projectors for my 94 hatch
so i was wondering if anybody can help me out with a site where it gives u step by step instructions
cuz i don't want to mess anythin up..!
or if anybody can give me some info that would be appreaciated also..!
#2
Remove bumper..
Remove top bumper channel under each lense.
Remove two bolts ontop of lense.
Remove inner corner nit..
Remove outer corner nut/bolt can't remember..
Repeat..
Remove negative on battery.
Remove corner lense unplug harness..
Unplug headlight harness..
Reinstall new lense in reverse..
Remove top bumper channel under each lense.
Remove two bolts ontop of lense.
Remove inner corner nit..
Remove outer corner nut/bolt can't remember..
Repeat..
Remove negative on battery.
Remove corner lense unplug harness..
Unplug headlight harness..
Reinstall new lense in reverse..
#5
Originally posted by crazycivic93
ok thanks
is it possible to install without removin the bumber..!
cuz i am new to installs..! i just got the hatch like 5months ago :P
ok thanks
is it possible to install without removin the bumber..!
cuz i am new to installs..! i just got the hatch like 5months ago :P
#9
#10
you can do it without removing the bumper you just have to remove the bolts on the fender (there should be 3) lift the fender from the wheel well about and inch and a half then remove the headlights that's how I did it
#12
Taking off the bumper takes 2 seconds.
1 bolt in each fender. Est. time - 10 sec each bolt
5 bolts under hood. Est. time - 5 sec each bolt
2 bolts underneath bumper - 20 sec each bolt (cuz you have to lay down, and they are right there ! )
Its as easy as that. Really simple !
1 bolt in each fender. Est. time - 10 sec each bolt
5 bolts under hood. Est. time - 5 sec each bolt
2 bolts underneath bumper - 20 sec each bolt (cuz you have to lay down, and they are right there ! )
Its as easy as that. Really simple !
Thread
Thread Starter
Forum
Replies
Last Post
R3dLine
Custom Honda Civic Exterior - Lighting
3
19-Jan-2009 03:10 PM
civic_integra
Interior - Audio - Security
11
01-Aug-2005 12:53 PM
CVC
Custom Honda Civic Exterior - Lighting
11
22-Feb-2004 08:47 PM
1niceSi
Custom Honda Civic Exterior - Lighting
9
03-Aug-2003 12:36 AM
imported_ReDmAn
CFz Discussion
0
30-Mar-2003 02:08 AM