imported_Team Rukus

Sup guys i got the projectors a while back now i need help hooking the angel eyes up.

At the current moment i took off my daylight running lights so is that a problem? Do i have to put them back on?

Secondly what exactly did you guys hook the two wires for the angel eyes up too? Now on the instructions it said something bout the runnin glight sor sumthin (i think dont remember) so can someone help me out there.

Also i believe Bond007 did his so your help would be MUCH apreciated.

Anyone plan on painting their projector housing yet

Raocorp

what gen civic?
i did mine on the sixth gen....the eyes would jump to your corner bulbs so when you turn your headlights on or even the parking lights your eyes come on as well.
On a 6th gen the corner bubls have 3 wires.....back, green/black, and I believe orange/white. Black is ground and green/black is power. the eye should be 2 wires, black and red. jump black to black and red to green/black and your done. Just be sure to test if they work before you bolt them in.

BOND007

imported_Team Rukus

Thanks for the reply guys but i already went ahead and did them. Now i have another problem.
My left side light beam is loooooooow like its not even up its basically aimed at the floor. I tried to raise it and lower it but its still stayin it one spot how can i adjust it? The other side seems to adjust very easily but the left side is fucked.

Raocorp

it should adjust the same way as the right one....if not it may be a defective unit.......how much did you try to adjust it. It doesn't move at all?

imported_Team Rukus

i went all the way with the screw both forward and backwards it aint moving.

Raocorp

gotta be a problem with the projector it self then