imported_SpinZSi

k i hope this works

<img src="http://www.handa-accessories.com/civic/civfl.jpg">

k one of my bulbs are burnt, and i was wondering if it can be replaced easily or is the bulb welded to the enclosure? & where could i find a replacement bulb for this specific fog? thanks

imported_nautica_t

shouldn't be a problem, hopefully you don't have to take the bumper off
but check to see if there are any screws around the assembly, but that should be an H3 bulb though. since most fog light application are h3 bulbs


good luck

imported_SpinZSi

No the bumper doesn't have to come off, and there are screws surrounding the lamp so i guess it will be pretty straight forward. Thanks for the reply and the info on the bulb