tranny keeps blowing
 

I have a 93 hatch with a d thats turbo ed and the tranny keeps blowing does anyone know somewhere to buy a built tranny or kno somewhere who builds them cheap or even kno of something else i can do other then rebuild it that can make it last more then a month thanks.

is it manual or auto?

manual

do you have a stock transmission with your turbo? your transmission may not be able to hold that much stress.

Transmission rebuild is never cheap. What I would do is replace the clutch with a Stage 1 or 2 and learn to do double clutch shifting to relief the stress on the synchros.

Parts will only last if you treat it well.

i have a stage 3 clutch and i know its not able to hold that much stress but there must be something else i can do

How much HP are you making??
What is your redline set at??
D trannys hate shifting over 8000.......and a stock tranny should hold up to quite a bit of HP.

Get rid of your slow shi.t box and get a better car problem solved

as long as my motor dosent blow running grip i think ill be fine thanks for the advise frozen.

learn to shift.

dont mis-shift on the highway bro.

Double clutch does wonders, give it a try.

Oh it will, and didn't yours blow anyway?

no i dont kno who told u but my motors fine trannys on the other hand go once a month

Could you be leaking transmission oil? Causing bearings inside the transmission to blow?
If so check if drive shaft is sitting in proprelly. Also I got a transmission from tiger Japanese for 220 and after 2 months of minor abuse its perfect.

was the flywheel shaved? could it be out of balance?

Input bearings are really weak on the D-series trans what blows?

syncros? bearings? leaks?

http://farm1.static.flickr.com/53/10...515959.jpg?v=0

jokes.... did you get the flywheel resurfaced??