matt1414

hey guys i got a B16b tranny and i got to piece all the gears and stuff back together.. can anyone give me some help or a write op on how to do it?there are like 20 different pieces to put back together:S THANKSSSSS

dirtywat

You need a service manual for your specific transmission to check if you have all the parts you need and in what order to assemble them. Check for any excessive wear on the gears, synchros, bearings, shaft splines, etc. You will also need access to a press to press gears, bearings, etc. onto the shafts. You may need a special tool when pressing/removing the gears on as well. And no, you may not use a hammer or pry bars. Make sure your shifter forks and rails are good. Check tolerances between parts after assembly. Make sure all your seals are good... blah blah blah. That's the basics of it. Check the manual for step by step procedures.