Peter H

Hi all,

Does anyone have any OEM 96-00 Civic/EL Front swaybar and a 22mm ITR, or any aftermarket Rear swaybar for a 96-00 Civic/EL lying around?

I need the following measurements in inches, as accurate as humanly possible:



A:
B:
C: Please start this measurement from the center of the mounting point.
D: This I need in millimeters.

Dont forget to state what bar the measurements are for.

Thank you!

Peter H

Bump

MrX

I had both lying around couple of weeks ago, now they're installed on the car. why you need these for? school project?

Peter H

Aww shoot.

I need these measurements as I am running suspension calculations for a future build. I need to figure out the load for each swaybar in body roll, and in one wheel situations. That way I can properly calculate the spring frequencies I want, and in turn calculate the valving that will complement the springs and swaybars.

At the moment I dont have access to any swaybars of my own, so I figured with such a big Honda community, someone must have some either lying around or in the back of their garage.

MrX

that sounds pretty cool, I might be able to get you the rear measurements, but the front is very tricky to measure as it has like million bends to it.

Are you making an excel sheet? I'd love to take a look at it when you finish!

blown90b16teg@11psi

iv got front and raer stock sway bars off a Da

SilverSleeper

Peter I have both on my car. If you would like to measure them, give me a call and we can meet up...