optionJDM: passwordJDM products! all in stock!
 

http://passwordjdm.com/images/Produc...K)%20Large.jpg

http://passwordjdm.com/skin_default/...2/DSC_0357.jpg
Our bars are individually hand crafted here in the states from 6061 aluminum. It's the strongest aluminum bars in the market and far exceeds the competition in both form and function. One of the biggest problems with most unibody cars that are bone stock from the factory is shock tower flex, a condition in which the shock/strut towers will flex under hard cornering resulting in a sloppy suspension feel.


Our bars were designed to eliminate that problem giving you a more solid feel to driving. With what we came up with, we were able to not only reach but we far exceeded that goal.

They are designed with a few goals in mind... form, function, and longevity.

About the bars... The mounting flanges are laser cut and formed from a SINGLE piece of 6061 T-4 aluminum and TIG welded individually for added strength and performance. The tubing is made exclusively for Password:JDM and is formed by a costly process known as extrusion from industrial grade aluminum which is then certified as 6061 T-4 to our exact specifications. The wall thickness (0.125") is far superior in rigidity to any other aluminum bars on the market to date. The coating is a high density epoxy coating proprietary to Password:JDM and is only available in Password:JDM Bronze.

pm for pricing

--------------------------------------------------------------------------------------------------------------------------

http://passwordjdm.com/images/Products/1997L.jpg
http://passwordjdm.com/images/Products/1997_5.jpg

Add that last finishing touch to your engine bay with these all new Password:JDM fender washers! Offered in anodized black, blue, bronze, and red, these fender washers feature the Password:JDM Kenji logo. All Password:JDM fender washers are constructed from aircraft grade aluminum and are matched up with long lasting stainless steel bolts.

Please note that each pack comes with 5 washers and bolts

pm for pricing

-----------------------------------------------------------------------------------------------------------------------------

http://passwordjdm.com/images/Produc...c)%20Large.jpg

Made of aerospace quality carbon fiber, the Password:JDM Carbon Fiber Power Chamber Intake surpasses any other intake on the market in quality, and in performance. Our intake is dyno proven to make 6.5 WHP and 7.4 FTQ on a nearly stock B16A engine! Manufactured here in the USA, the Power Chamber is constructed of the finest carbon fiber, and filter elements currently available on the market. The Power Chamber Intake comes complete with all mounting hardware required to install on any DC Integra (Non-ABS), EG, and EK Civic chassis.

Using a unique flared intake tube design, the Power Chamber is able to deliver noticeable gains across the entire power band. This intake gives you the best of both worlds. The security of knowing you are at no risk of hydro-lock, the power delivery that most cold air intake systems can only dream of, and the unmatched style of a genuinely unique intake system.

Through integration of form and function, the Power Chamber will make a bold statement about you and your vehicle. Spectators all around will notice your fine taste in performance products, and will envy your engine bay's unique styling!

pm for pricing

--------------------------------------------------------------------------------------------------------------------------------------

http://passwordjdm.com/images/Products/1608L.jpg

Crafted from aerospace grade 2x2 twill Carbon Fiber and 100% high solid epoxy resin, our bags trays are designed to fit the USDM vehicles without any modification to your stock dash. What this means is that you can retain your factory airbag and reinstall it later if you need to. The Password:JDM Carbon Fiber Airbag Trays are truly plug & play! Installation takes less than 20 minutes, and requires only the basic tools that every car enthusiast should have! A quality fit and finish is guaranteed.

The Password:JDM Carbon Fiber Airbag Tray is a nice finishing touch to any vehicle that's show/race worthy. These are high quality pieces crafted here in the States. Like all of Password:JDM's products, these are produced one at a time. The exceptionally consistent quality you would expect from us is delivered each and every single time.

Available fitments:

EG '92-'95 Civic
EK '96-'00 Civic
DC '94-'01 Integra

pm for pricing

all pm's replied... for those who asked, the carbon fiber intake do fit d-series motors.

bump!

3 point strut bars are back in stock!!!

Password:JDM Armored Plate Header Shield

Here is an armored plate header shield! its made of plate grade steel! it's stong enough to stop a 9mm slug as well as asphalt! spend a small fortune to save the trick header that really cost a fortune!

The armored plate header shield has been designed to fit most all front wheel drive, four cylinder engine setups. Includes three large, and two small adjustable clamps to ensure proper fitment on most applications. The header shield includes a hard anodized black finish to prevent corrosion.

pm for pricing

http://passwordjdm.com/images/Products/2196_2.jpg

http://passwordjdm.com/images/Products/2196L.jpg

what about these:

http://passwordjdm.com/PasswordJDM-C...P2055C366.aspx

http://passwordjdm.com/PasswordJDM-D...s-P1904C5.aspx

gotta have some K-Series love in here too you know.

We had a few but we are now sold out. i can order some more in if needed.
let me know
thanks
Richard
optionJDM

how much do they go for?

noob question >>> what are these for?

Password:JDM Armored Plate Header Shield

its so that you dont damage your header when your car is slammed.

Some aftermarket performance headers such as the Mugen for B-series engines hangs lower to ground than others or stock headers. The plate is essentially served as a skid plate like you'd find on SUV's or Trucks. The plate helps protect the header from scraping or scratching. The plate will take the scratch or scrape instead of the header. Hope that helps.

thanks. :thumb:

can you get me this?

http://passwordjdm.com/PasswordJDM-E...P2527C173.aspx

i have a set in stock...they are $160.00 for the kit
let meknow
thanks
Richard
optionJDM
905-305-6316

cool...now do you have in clear? i don't want the yellow colour...and are they plastic made or glass made?

just to confirm...these are passwordjdm right?

thanks

http://passwordjdm.com/Hamp-Oil-Filter-P1656C364.aspx
Can you get me this? If you can, gimme a price for one individual and one case

:focus:

i only have them in yellow at the momment.

these are not the passwordJDM ones... they are a different company.

u guys do price match on password carbon fiber intake?? u guys gave me a price of 260$ , t3knot!k sells for only $210

price matching is avalable....


all passwordJDM products are back in stock