Hey Im back, With a new ride. ;)
17-Aug-2010, 08:31 PM
#1
Registered User
Thread Starter
Join Date: Jan 2007
Posts: 41
Hey Im back, With a new ride. ;)
hey guys and gals, Just thought Id say hey. just got another civic. This ones a little older then My 00 SiR i had previously But Still pretty nice I would say.
anyways Its a 92 Bubble back with 132k on he shell and Under 10k on the fully built engine.
But its in really good shape, has a few minor bumps and scrapes. But still decient for origional paint.
anyways. Its got the typical B16, but with a couple minor mods, like
well a Precision T3 60 trim turbo.
turbo smart 38mm external WG.
revhard turbo manifold.
precision FMIC.
3" aluminum cold side piping
2.5" hot side piping.
8.5:1 pistons
RC 780 cc injectors
Tyoe R cams, dual valve springs. retainers.
eagle rods.
drive shaft shop axles.
full turbo back 3" exhaust with Apexi N1 muffler.
spent many hrs on the dyno getting tuned, and Currently running 21psi on pump. Needless to say it pulls like a raped goat.
Im not a fwd fan at all.. and this car reminds me everytime im in. well any gear but 4th. and 5th. even 4th spins if I dont granny shift...
But I bet you want to see some pics now.
Its pretty sleeperish.
Ok Ok Ok.. I know.. You want business shots.. alright...
And still have heated and power seats to boot. Who would have thought nissan Maxima seats pretty well bolt in.. Theres a mod for you cats..
I still havnt decided what wheels Im going to put on yet, Im thinking maybe some sort or 15" light weight bronze wheel. with a DOT slick.. Maybe ill be able to hook up then.... haha
Still fun none the less..
anyways Its a 92 Bubble back with 132k on he shell and Under 10k on the fully built engine.
But its in really good shape, has a few minor bumps and scrapes. But still decient for origional paint.
anyways. Its got the typical B16, but with a couple minor mods, like
well a Precision T3 60 trim turbo.
turbo smart 38mm external WG.
revhard turbo manifold.
precision FMIC.
3" aluminum cold side piping
2.5" hot side piping.
8.5:1 pistons
RC 780 cc injectors
Tyoe R cams, dual valve springs. retainers.
eagle rods.
drive shaft shop axles.
full turbo back 3" exhaust with Apexi N1 muffler.
spent many hrs on the dyno getting tuned, and Currently running 21psi on pump. Needless to say it pulls like a raped goat.
Im not a fwd fan at all.. and this car reminds me everytime im in. well any gear but 4th. and 5th. even 4th spins if I dont granny shift...
But I bet you want to see some pics now.
Its pretty sleeperish.
Ok Ok Ok.. I know.. You want business shots.. alright...
And still have heated and power seats to boot. Who would have thought nissan Maxima seats pretty well bolt in.. Theres a mod for you cats..
I still havnt decided what wheels Im going to put on yet, Im thinking maybe some sort or 15" light weight bronze wheel. with a DOT slick.. Maybe ill be able to hook up then.... haha
Still fun none the less..
Welcome!!
19-Aug-2010, 09:51 AM
#13
Registered User
Thread Starter
Join Date: Jan 2007
Posts: 41
Hey Guys thanks for the comments.
Well the seats are out of a 99ish maxima.
Numbers Im not exactly sure. I dont have the dyno sheet to know exactly. BUT its around the 400 whp mark. and well.. The car did get kicked off TMP. because it didnt havea cage.. So ya. That shows the car does get up and go.
it was funny, the other day I had a mark IV supra roll up on me the other day. I seen him comming up behind me with a big front mount, sexy deep dish wheels. anyways so we pulled a couple gears and well when I hooked up it looked like he put on the brakes he went back so fast haha.
But this car is just silly, I have so much traction issues, Ill be doing 120 on the 401, put it up to 3rd, when the boost rolls on the engine just breaks loose and bounces off limiter. lol..
ahh well Hopefully some dot slicks will remedy this problem a lil.
anyone know what these bubbles weigh?
Well the seats are out of a 99ish maxima.
Numbers Im not exactly sure. I dont have the dyno sheet to know exactly. BUT its around the 400 whp mark. and well.. The car did get kicked off TMP. because it didnt havea cage.. So ya. That shows the car does get up and go.
it was funny, the other day I had a mark IV supra roll up on me the other day. I seen him comming up behind me with a big front mount, sexy deep dish wheels. anyways so we pulled a couple gears and well when I hooked up it looked like he put on the brakes he went back so fast haha.
But this car is just silly, I have so much traction issues, Ill be doing 120 on the 401, put it up to 3rd, when the boost rolls on the engine just breaks loose and bounces off limiter. lol..
ahh well Hopefully some dot slicks will remedy this problem a lil.
anyone know what these bubbles weigh?
25-Aug-2010, 12:25 PM
#16
Junior Member
Join Date: Mar 2008
Posts: 23
Hey Guys thanks for the comments.
Well the seats are out of a 99ish maxima.
Numbers Im not exactly sure. I dont have the dyno sheet to know exactly. BUT its around the 400 whp mark. and well.. The car did get kicked off TMP. because it didnt havea cage.. So ya. That shows the car does get up and go.
it was funny, the other day I had a mark IV supra roll up on me the other day. I seen him comming up behind me with a big front mount, sexy deep dish wheels. anyways so we pulled a couple gears and well when I hooked up it looked like he put on the brakes he went back so fast haha.
But this car is just silly, I have so much traction issues, Ill be doing 120 on the 401, put it up to 3rd, when the boost rolls on the engine just breaks loose and bounces off limiter. lol..
ahh well Hopefully some dot slicks will remedy this problem a lil.
anyone know what these bubbles weigh?
Well the seats are out of a 99ish maxima.
Numbers Im not exactly sure. I dont have the dyno sheet to know exactly. BUT its around the 400 whp mark. and well.. The car did get kicked off TMP. because it didnt havea cage.. So ya. That shows the car does get up and go.
it was funny, the other day I had a mark IV supra roll up on me the other day. I seen him comming up behind me with a big front mount, sexy deep dish wheels. anyways so we pulled a couple gears and well when I hooked up it looked like he put on the brakes he went back so fast haha.
But this car is just silly, I have so much traction issues, Ill be doing 120 on the 401, put it up to 3rd, when the boost rolls on the engine just breaks loose and bounces off limiter. lol..
ahh well Hopefully some dot slicks will remedy this problem a lil.
anyone know what these bubbles weigh?
, You need not only slicks but some LSD in your life. Great ride, was there much modification to get the seats to fit, how bad was the wiring for the heating, and power on them?
Thread
Thread Starter
Forum
Replies
Last Post
prelude20009
Honda Civic (+ other) Parts/Accessories for Sale or Trade
3
08-May-2006 08:16 AM
