B-lue16A_EK

I'm using the factory keyless remote for my 99 Civic SiR, which looks the same as the pic below



But currently the remote seems like not fully functioning. My friend has an extra 02 Civic remote, looks the same as the pics below



I'd like to reprogram the new remote so that I can use it for my 99 Civic

does anyone know how to reprogram the remote and is the new remote compatible with my Civic?

lordm

pm civic sir as he works for honda and would be the best person

B-lue16A_EK

is his user name "00 Civic SiR" ?

lordm

no

bbarbulo

iTrader: (2)

get the dealer to do it, I think they might do it for free

B-lue16A_EK

no...i did ask them about it....like 80 bucks

BBProductions

'96-'98 Remote Transmitter Programming
I posted this in another thread, but just in case anyone needs it, here's the directions for reprogramming the stock keyless (typed directly from the Honda directions). Btw, this is all I know and I do not have the Service Bulletin mentioned at the end of the article.:

1996-98 Civic EX, Civic HX and LX (with optional keyless transmitter)

P/N 39950-S01-A01, H/C 4811352

Programming the Transmitter

NOTES
*Entering the programming mode cancels all learned transmitter codes, so none of the previously programmed transmitters will work. You must reprogram all the transmitters once you're in the programming mode.

*To keep the system from exiting the programming mode, complete each step within 5 seconds of the previous step, and program the transmitters within 10 seconds of each other.

1. Turn the ignition switch ON (II).

2. Press and hold the Valet-Disarm button on the radio (between the AM/FM button and the CD/TAPE button) to enter the programming mode. (Continue to hold the button during the procedure, or programming will be cancelled.) Check that the power door locks cycle to confirm that you're in the programming mode.

3. Press the "LOCK" or "UNLOCK" button on the transmitter. Check that the power door locks cycle to confirm that the code was accepted.

4. Press the "LOCK" or "UNLOCK" button on all other transmitters. (You can program up to four transmitters per vehicle.)

5. After all the transmitters have been programmed, release the Valet-Disarm button to exit the programming mode.

For detailed information on all Honda keyless remote transmitters, refer to Service Bulletin 96-046, Keyless Remote Transmitter Information.

BBProductions

damn, you got a 99... hmm wonder if the sdame? prob not, don't you have a service manual though? just download it and search from there...

B-lue16A_EK

Cool, thanks for the description

but.....I've changed the car deck and there's no Valet-Disarm button on it ......................

imported_phuviano

try this.. I dunno if it will work but its worth a try.

http://www.handa-accessories.com/crv/KEYLESSPROG.pdf

B-lue16A_EK

ai...i tried it but didn't work
thanks anyway