imported_loudsubz

Ok guys, Anthony gave me a Suzuki remote keyless controller, with remote control, but all it came with was the unit and remot, no harness to clip into the plug on the unit or anythign else.

So im wondering if anyone has any info on this unit.

Its a 37191 - 69G00 unit.

Made by Suzuki

and it says Rx MDL No. D01Sb

any info on what pin does what would be much appreciated.

Rice Burner

Why don't you give the Suzuki parts counter a call?

PULOVR

it may be a Code Alarm......but it's not worth the hassle.

It probably won't have any aux inputs/outputs...ie for a shock sensor, extra channel....ect.........

Toss it in the garbage.

imported_loudsubz

Alan, All i need it for is to lock/unlock the doors. Its not an alarm just a remote keyless controller.

bbarbulo

iTrader: (2)

Well, I'd take it apart first and figure out power supply first. There will be constant power, ACC power and a ground, then hook those up and play with the remote and a multimeter. Once you get a signal, label it...I don't think you'll ever get a wiring diagram for one of those. The circuit board should have markings on it as to what pin is what by the way.

HAPPY

Matt - do you have actuators in your doors...if not that thing ain't gonna do crap.

LOCKDOWN-P5

Hey loudsubz, that harness is going to be extremely hard to find, and the dealership is going to charge a fortune for a specialised part like that. Even if you get it working the range isn't going to be very high and just like PULOVR said there will probably be no inputs/outputs for a shock sensor or other sensor types. I know you are only looking for keyless entry but the price difference between a keyless only unit and an alrm with keyless is really not that high.

PULOVR

Exactly.

You are better off getting a cheapo Wall Mart one, and use the thing in Valet mode. LOL It would be cheaper than getting/buying a remote for the one you have. You would will also be able to upgrade the cheapo too.

IMO.