Cluster
#2
i don't know much about that gen but perhaps its a stock si cluster with a different overllay on it. But wait for some replys from people that know more about this gen.
oh and good luck getting that cluster in your eg. sorry to have crushed your hopes of having that cluster. Lol
oh and good luck getting that cluster in your eg. sorry to have crushed your hopes of having that cluster. Lol
#4
Guest
Posts: n/a
That is A USDM Cluster which is the equivelant to an SIR Cluster. Notice the larger numbers are for MPH?
You would have to source it out in the states. Why don't you jus search for an SIR cluster instead if you are looking? Lots of people selling on the board.
You would have to source it out in the states. Why don't you jus search for an SIR cluster instead if you are looking? Lots of people selling on the board.
#9
Originally posted by InfamousCivic
But then it will say SIR, and my car is an Si.
But then it will say SIR, and my car is an Si.
put some black tape or black color on 'r' in the sir to get that si look..haha (bad idea btw) or find that oem gauage face plate piece out of a USDM cluster and swap it in the CDN one.
#10
Guest
Posts: n/a
Originally posted by szuberi
high maintenance eh..lol
put some black tape or black color on 'r' in the sir to get that si look..haha (bad idea btw) or find that oem gauage face plate piece out of a USDM cluster and swap it in the CDN one.
high maintenance eh..lol
put some black tape or black color on 'r' in the sir to get that si look..haha (bad idea btw) or find that oem gauage face plate piece out of a USDM cluster and swap it in the CDN one.
SIR or US SI cluster's aren't cheap, even second hand
#11
Originally posted by Double_B
Haha, my car is a DX and I have the SIR cluster, who cares!
Haha, my car is a DX and I have the SIR cluster, who cares!
- help me!!! haha
Originally posted by szuberi
high maintenance eh..lol
put some black tape or black color on 'r' in the sir to get that si look..haha (bad idea btw) or find that oem gauage face plate piece out of a USDM cluster and swap it in the CDN one.
high maintenance eh..lol
put some black tape or black color on 'r' in the sir to get that si look..haha (bad idea btw) or find that oem gauage face plate piece out of a USDM cluster and swap it in the CDN one.
All about the clean look - for me anyways - Yes clearly, I'm picky! Haha
#12
Guest
Posts: n/a
Then I would suggest going to a US board, probably Honda Tech, see if anyone is selling one or e-bay and buy an SI cluster. To swap out the speedo, then you end up having SIR and SI on your cluster, so you would have to stick with the SI speedo and have the MPH like in your picture.
#13
Originally posted by Double_B
Then I would suggest going to a US board, probably Honda Tech, see if anyone is selling one or e-bay and buy an SI cluster. To swap out the speedo, then you end up having SIR and SI on your cluster, so you would have to stick with the SI speedo and have the MPH like in your picture.
Then I would suggest going to a US board, probably Honda Tech, see if anyone is selling one or e-bay and buy an SI cluster. To swap out the speedo, then you end up having SIR and SI on your cluster, so you would have to stick with the SI speedo and have the MPH like in your picture.
Thanks bud, I'll definitely have to do my research!
#18
Originally posted by JDMman
from the picture it doesn't look like its in an eg hatch back.... unless its had a full dash conversion which in that case i would like to see some more pics
from the picture it doesn't look like its in an eg hatch back.... unless its had a full dash conversion which in that case i would like to see some more pics
#19
Thanks brian for the correction.
Mustafa...Bruno is right...the original pic you posted is of the cluster still inside a 96-00 dash while the photo in the link you posted is just the gauge face plates out of an SI cluster swapped into a 92-95 dash.
see the black trim around the plates is different from 96-00 and how far up the SI logo goes..lol
Mustafa...Bruno is right...the original pic you posted is of the cluster still inside a 96-00 dash while the photo in the link you posted is just the gauge face plates out of an SI cluster swapped into a 92-95 dash.
see the black trim around the plates is different from 96-00 and how far up the SI logo goes..lol
#20
Guest
Posts: n/a
Originally posted by szuberi
Thanks brian for the correction.
Mustafa...Bruno is right...the original pic you posted is of the cluster still inside a 96-00 dash while the photo in the link you posted is just the gauge face plates out of an SI cluster swapped into a 92-95 dash.
see the black trim around the plates is different from 96-00 and how far up the SI logo goes..lol
Thanks brian for the correction.
Mustafa...Bruno is right...the original pic you posted is of the cluster still inside a 96-00 dash while the photo in the link you posted is just the gauge face plates out of an SI cluster swapped into a 92-95 dash.
see the black trim around the plates is different from 96-00 and how far up the SI logo goes..lol
And yep, that is correct. All the instruments were pulled out of a EK and the EG faceplate and Bezel are being used.